Shop LP Gas Heater Parts and Supplies

 
This TYPE 1 ACME appliance fitting is a wrenchless, user friendly, right hand connector. This TYPE 1 ACME appliance fitting is a wrenchless, user friendly, right hand connector. Max output is 200,000 BTU/hr. Use to connect LP-Cylinders to regulators, hoses and other fittings. The 572566 is an air proving switch used on the CP400, possibly other models
Acme Thread Connector G1851 LP Gas 35-100K btu heatersAcme Thread Connector G1852 100K-200K btu heatersAir Switch 572566 LB White CP400

$20.00

$20.00

$26.00

This ball valve was used on 350k btu LP heaters and 55k btu LP heaters. Models include BLP55V, RLP55V and REM55PV This L.P.G. assembly consists of a U.L. listed 11” W.C. regulator, P.O.L. type tank connection with an excess flow device and a 10 foot length of U.L. listed LPG hose with a 3/8 female flare swivel on the hose end. This rubber boot covered ignition wires on some heaters.
Ball Valve 113873-01 also part# 7431 NLABBQ Regulator and 10ft hose kit 63-5116Boot M50050

$12.00

$41.00

$10.00

This is the 1889 burner ring for older Universal, All Pro LP gas heaters Capacitor 2201390 Dyna Glo & Thermoheat RMC-FA150NGDGD The 22-521-0002 circuit board was used on 60-150K btu blower type LP heaters made by Pinnacle
Burner Ring 1889 older Universal heatersCapacitor 2201390 Dyna Glo & Thermoheat RMC-FA150NGDGDCircuit Board 22-521-0002 LP Gas Forced Air 60-150K btu

$12.00

$6.00

$15.00

Circuit Board 2201181 Dyna Glo & Thermoheat 150k Nat Gas Htr RMC-FA150NGDGD The 571344 is the ignition control board for the CP400 This 110287-01 is the ignition control board for LP gas heaters made by Desa. Brands include Reddy, Master, Remington and more.
Circuit Board 2201181 Dyna Glo & Thermoheat 150k Nat Gas HtrCircuit Board 571344 LB White CP400, CP170DSI Control 110287-01 also 7808 also 113954-01

$120.00

$115.00

$61.00

This M51605-01 control is used on many LP heaters. This is a gaslighter. It has the following on it: Mark 10-117-3-8.5-8.5-Q011 DSI Control M51605-02 or 7499 This 110267-01 is the wiring harness for the 7808 dsi control board
DSI Control M51605-01DSI Control M51605-02 or 7499 DSI Control Wire Harness 110267-01 for 7808

$140.00

$91.00

$15.00

This spark plug (ignitor) is used on Dyna Glo and Thermoheat 40K btu LP heaters The 2201392 ignitor was used on 100K btu forced air LP heaters made by Dyna Glo, Thermoheat and Dura Heat Models include - GFA100, GFA100A, RMC-FA100DGP, RMC-FA100DGP-01 and more Igniter 2206033 Thermoheat
Electrode / Ignitor 2201375 Dyna Glo Thermoheat 40K LP HtrsElectrode / Ignitor 2201392 Dyna Glo Thermoheat 100K LP HtrsElectrode / Ignitor 2206033 Thermoheat FA60DGD

$6.00

$5.00

$5.00

Electrode igniter used in LP heaters. Models include Reddy RLP35, Master BLP35, BLP50A, Remington REM35LP, REM50PVA, Vanguard VLP35 Electrode for 30k and 40k btu LP heaters made by Desa. Brands include Reddy, Remington and Master. The 1377 electrode was used in 30K btu LP heaters made by Scheu
Electrode 099539-01 35k-50k btu LP htrsElectrode 104784-01 for LP heaters NO LONGER AVAILABLEElectrode 1377 All Pro 30K btu 115739-01

$10.00

$17.00

$26.00

The 28080 electrode was used on 35K btu lp htrs Electrode 7160 includes wire Universal 250 and 250A Electrode 7652 Universal 250S and 250VC also 27652
Electrode 28080 All Pro, Universal, Mr Htr 35K LP htrs 8080Electrode 7160 includes wire Universal 250 and 250A 0931Electrode 7652 Universal 250S and 250VC also 27652

$7.00

$16.00

$6.00

Electrode Ignitor  CFM200.14  Dyna Glo RMC-LP200L 23-1047 Fan for 30k and 40k btu LP heaters made by Desa. Brands include Reddy, Remington and Master.
Electrode Ignitor CFM200.14 Dyna Glo RMC-LP200L 23-1047Electrode M51580-01 Fan 101478-02 30-40k BTU LP 6 ¾” diameter

$6.00

$16.00

$8.00

This fan was used on 170k btu LP heaters made by Desa. Brands include Reddy, Remington and Master. It was also used on 150k and 170k btu htrs made by Universal. The 22-514-0002 fan was used on 100, 125, 150K btu LP heaters made by Pinnacle Fan 2304936 8" diameter 150K btu LP heater
Fan 113950-01 150-170k BTU LP Master All Pro Remington 6074Fan 22-514-0002 Pinnacle 100-150K btu LP & Nat Gas heaters 8"Fan 2304936 8" diameter 150K btu LP and NG Dyna Glo htrs

$20.00

$9.00

$10.00

The 6073 fan blade was used on 350K btu LP heaters made by Scheu Mfg
Fan 26086 Mr Htr LP gas 55FAV and 85FAVFan 6073 Scheu 350K btu LP htrs Universal or All ProFlame Sensor 22-141-0003 Pinnacle 375K btu LP htrs

$8.00

$26.00

$20.00

This is a rubber foot for the base of a heater. Sold individually. Models include TD100, TD102, TD104 and TD110 Fuel Tube 2304830 Thermoheat LP gas heater The 098237-08 Gas Control valve
Foot Base 118902-01 TD100 seriesFuel Tube 2304830 Thermoheat LP gas heaterGas Control Valve 098237-08, 0630545 heaters SIT 6300

$2.00

$12.00

$118.00

Accurately measures the amount of propane in your tank. Calibrated for use with 20lb tanks. Simply hook to tank, lift, and view the gauge. This 1/4" x 10 ft hose is used primarily with LP gas convection heaters. It also is used with the 375K LP heater made by Desa. It has 1/4" mpt x 1/4" female flare swivel fittings.
Grill Gauge GG1100Hose 1/4" x 10 ft LP Gas #2510 also part# 6151Hose 5002721 Dyna Glo LP gas hose

$10.00

$20.00

$56.00

Part# 3810. This 3/8" x 10 ft LP hose is used on 150k btu heaters. Hose QG-0008C Dyna Glo & Thermoheat Tank Top Heaters Hose/Regulator 5002614 50-60K btu Dyna Glo Thermoheat LP
Hose LP 3810 3/8" x 10 ft also part# 6152Hose QG-008C Dyna Glo & Thermoheat Tank Top Heaters 23-7536Hose/Regulator 5002614 50-60K btu Dyna Glo Thermoheat LP

$35.00

$10.00

$60.00

The KR-106A hose and regulator assembly was used on RA18 cabinet heaters made by Dyna Glo and other manufacturers. The hose is 24" long This LPA3020 hose regulator assembly works on LP heaters that require an operating pressure of 11-14". Regulator and hose assembly for the 375k btu LP heater made by Desa. Brands include Master, Reddy, Remington and others.
Hose/Regulator assy KR-106A Dyna Glo RA18 Cabinet heatersHose/Regulator assy LPA3020 3/8 x 10 ft hose + 6255 Regulator Hose/Regulator assy LPA3030

$18.00

$36.00

$100.00

The LPA3070 is a hose and regulator assy for Desa 155k BTU LP heaters. This ignition control was used primarily on 100k btu LP heaters made by Desa. Brands include Reddy, Remington and Master The 2201369 is a control board for some Dyna Glo and Thermoheat LP heaters
Hose/Regulator assy LPA3070 3/8 x 10 ft hose + RegulatorIgnition control 102601-01 100k btu LP heater also 6250Ignition Control 2201369 Dyna Glo & Thermoheat LP htrs

$70.00

$24.00

$22.00

21803 Ceramic ignitor for Universal or All Pro oil fired heaters 1803NR This ignitor electrode was used primarily on 155k btu LP heaters made by Desa. Brands include Reddy, Remington and Master Ignitor/electrode for heaters made by Desa
Ignitor / Electrode 1803 also part# 21803 and F221803Ignitor / Electrode 099133-01 155k btu LP heaters 71-037-1030Ignitor 103904-01 electrode Desa heaters

$20.00

$12.00

$24.00

This ignitor electrode was used primarily on 100k btu LP heaters made by Desa. Brands include Reddy, Remington and Master This electrode was used on the 375K btu LP gas heaters made by Desa. Brands include Master, Reddy, Remington and others. Ignitor Electrode CFM25.09-04B used on LPC25DG
Ignitor Electrode 102487-01 100k btu LP heaterIgnitor Electrode 375k LP 097805-01Ignitor Electrode CFM25.09-04B used on LPC25DG 23-1045

$11.00

$12.00

$6.00

The CFM80.06B electrode is used on the LPC80 convection heater...maybe others This 113867-01 Electronic Ignitor is used on LP heaters made by DESA and Scheu. The 097159-04 Piezo Ignitor is the snap in style ignitor used on many gas logs, fireplaces, vent free heaters and other natural gas and propane appliances.
Ignitor Electrode CFM80.06B LPC80DG 23-1046Ignitor Hi Lo mini – p/n 113867-01 same as 3275 23275 NLAIgnitor Piezo 097159-04 snap in style

$6.00

$28.00

$10.00

This push button ignitor was used on many different types of gas fired heaters. Brands include Reddy, Remington, Master and many more. The 24-122-0003 Piezo Ignitor was used on some LP heaters made by Pinnacle You can use these insulated wires to jumper terminals when testing to see if your photocell is bad. Many other purposes. Sold by the pair.
Ignitor Piezo 102445-01 also SPC694Ignitor Piezo 24-122-0003 LP htrs by Pinnacle 102445Jumper Wires Insulated 18" T100-02 or T100-82

$10.00

$5.00

$6.00

This knob was used on 40-150K btu Dyna Glo Delux and Dyna Glo Pro LP Gas heaters. This knob will not lie flat as it extends a 1/4" where it connects to the valve The 2101588 knob is used on the FA100DGP model and a few others This 1 5/8" diameter knob works on 40k - 150k btu gas forced air heaters made by Pinnacle. Brands include Pro Temp, Heat Hog and Heat Stream.
Knob 2101451 Dyna Glo LP heater also # 2315926Knob 2101588 Dyna Glo FA100DGP LP htrKnob 22-516-0001

$5.00

$4.00

$1.00

This black 28651 knob slides on a ball valve on 80CV & 200CV heaters The 28773 burn rate adjustment knob was used primarily on 170K btu LP heaters This knob was used on ALL Dyna Glo and Thermoheat convection heaters since 2008.
Knob 28651 Mr Heater 80CV 200CV also part# 8651 NLAKnob 28773 Burn Rate knob used on 170K btu LP htrs also 8773Knob CFM80.00-10 used on 25-200K btu convection heaters 23-1025

$5.00

$11.00

$5.00

Knob PT-N06-24 RA18 Series heaters This limit switch was used primarily on 155k btu LP heaters made by Desa. Brands include Reddy, Remington and Master This limit switch was used primarily on 50K btu LP heaters. It was also used on BLP155A, RLP155A, RLP150AT, BLP155AT. Brands include Reddy, Remington and Master.
Knob PT-N06-24 RA18 Series heatersLimit switch 101481-07 – 155k btu LP heaters NLALimit Switch 101732-01

$6.00

$20.00

$48.00

This temperature limit switch, also called a thermal limit switch was used on all 375K btu LP gas heaters made by Desa. Brands include Reddy, Remington, Master and more. Limit Switch
Limit Switch 101732-03Limit Switch 101732-04 NO LONGER AVAILABLE 101481-04Limit Switch 101732-05 also 101481-05

$36.00

$40.00

$29.00

This 113889-02 Limit switch used primarily on 125K btu LP gas heaters. This 113524-01 limit switch was used primarily on 170k btu LP heaters. Brands include Reddy, Remington, Master, Universal and more. Same as part number 6168 and 113848-01
Limit Switch 101732-06 30K btu Desa heatersLimit Switch 113889-02 same as 2003Limit Switch 115324-01 Desa 6168, 1550, 113848-01 Mr Htr 26168

$20.00

$20.00

$28.00

This is the temperature limit switch used on 125K BTU Dyna Glo and Thermoheat heaters. This temperature limit switch was used on KFA45DGP-01 and KFA75TDGP-01 heaters
Limit Switch 1440 All Pro 30FAC or SPC30Limit Switch 2153-0001-00 NLA NO REPLACEMENTLimit Switch 2153-0003-00 45 & 75k btu Dyna Glo NLA

$0.00

$14.00

$10.00

Limit Switch 2153-0005-00  KFA210 K btu Dyna Glo Thermoheat This temperature limit switch was used on model KFA75L This temperature limit switch was used on model KFA125L
Limit Switch 2153-0005-00 KFA210 K btu Dyna Glo ThermoheatLimit Switch 2153-0022-00 75K btu Dyna Glo ThermoheatLimit Switch 2153-0023-00 KFA125L Dyna Glo Thermoheat

$8.00

$10.00

$10.00

This temperature limit switch was used on model KFA210L This 30" hose is used with the P400 t block so that you can manifold LP tanks together. This hose has pol fittings on both ends. Motor 099521-01 for 35k btu LP gas heater Reddy Master Remington
Limit Switch 2153-0024-00 KFA210L Dyna Glo ThermoheatLP Hose Pigtail 1630RU 30" Connects LP Tanks TogetherMotor 099521-01 for 35k btu LP gas heater Reddy Master NLA

$10.00

$12.00

$40.00

Motor 1174 for 350K btu LP htr Universal and All Pro 170K BTU motor for LP Gas heaters.
Motor 1174 for 350K btu LP htr Universal and All ProMotor 121208-01 LP Htr 170K btu Reddy Master also 22251Motor 1551 85K btu LP heater 113860-01

$160.00

$80.00

$65.00

The 1652 motor was used on 40-55k btu LP heaters The 22-061-0002 motor was used on 100, 125, 150K btu LP heaters made by Pinnacle The 22-061-0018 motor was used on 375K btu LP gas heaters made by Pinnacle Brands include- Master, Remington, Dayton, Mi-T-M, BE, Stanley and a few more
Motor 1652 All Pro & Universal 40-55K btu LP htrs 21652Motor 22-061-0002 Pinnacle 100-150K btu LP & Nat Gas htrsMotor 22-061-0018 375K btu LP gas Master, Dayton, Remington

$51.00

$74.00

$91.00

The 098165-01 start relay was used primarily on 150-155K btu LP gas heaters made by Desa Brands include - Reddy, Remington, Master and more This motor is for the 100k btu LP heater Mounting Bolt Knob used on all TT30 tank top heaters made by Dyna Glo and Thermoheat
Motor Start Relay 098165-01 Desa 150-155 LP Gas Htrs NLAMotor – 102366-01 - 100k btu LPMounting Bolt Knob TT30C-3 all TT30 heaters Dyna Glo Thermoheat

$16.00

$40.00

$3.00

This is the nozzle/orifice used on Desa 155k btu LP heaters, Brands include Reddy, Remington, Master and Vanguard The 099059-03 ODS Pilot Assembly is the replacement oxygen depletion sensor pilot assembly For Many Desa, Comfort Glow & Vangaurd Propane Vent Free Heaters. Also part# 099059-04 and PP227
Nozzle 099138-01 LP orifice 155k btu LP htrsODS Pilot 099059-03 LP Gas for unvented gas wall htrs L98071-04ODS Pilot 099440-06 Vanguard Comfort Glow 099059-04 120630-02

$30.00

$36.00

$36.00

The 104286-01 LPG ODS pilot assembly was used in many of the fireplaces and gas logs made by DESA. The 120630-01 Pilot ODS assembly was used on unvented Natural Gas wall heaters and Natural Gas unvented gas log sets and fireplaces. The PP229 ODS pilot assembly works in Nat Gas heaters, gas logs & fireplaces.
ODS Pilot 104286-01 LP Gas PP224ODS Pilot 120630-01 Unvented Nat Gas Wall Heaters and LogsODS pilot PP229 Nat Gas heaters gas logs & fireplaces 104285-01

$36.00

$23.00

$40.00

ODS pilot PT-N11B.6 model# RA18LPDGD The pilot Orifice 3140 for Universal 250K btu LP htrs by Scheu
ODS pilot PT-N11B.6 T-couple all RA series cabinet heater 230567Orifice 3140 for Universal 250K btu LP htrs by ScheuPad 22-509-0001 Pinnacle 40-150K btu LP heaters

$16.00

$16.00

$2.00

This 30" brass hose is used with the P400 t block so that you can manifold LP tanks together. This brass hose has pol fittings on both ends. This brass tailpiece connects an LP regulator to a propane tank. This type of connector can be used with ALL LP gas heaters. Also part# 6252 and 113791-01 This G1653-3 o ring is used on brass tank connectors, sometimes referred to as POL fittings
Pigtail LP brass hose CP2030 or 1662POL LP fitting G1629 also part# 6252 and 6433 and G1690POL O-Ring G1653-3

$10.00

$7.00

$1.00

Power Switch 2201549 Dyna Glo & Thermoheat RMC-FA150NGDGD This plastic cap should be used to protect the threaded brass valve on 40 lb LP tanks and smaller. Directions are print in English on one side and Spanish on the opposite side. Sold individually. This regulator is for 375K btu LP heaters made by Desa. Brands include Master, Reddy, Remington and more.
Power Switch 2201549 Dyna Glo & Thermoheat RMC-FA150NGDGDQC CapRegulator 0-20 psi LPA2020 375K btu LP heaters 6258

$3.00

$0.75

$40.00

In Dec 2014, the factory made a change to the regulator. This new updated regulator has a 1/2" opening and a white dot on the knob. This would be similar to the valve used on the original heaters. Used on various unvented LP gas wall heaters. Regulator 103406-01 output 3-6" used on BNG150T
Regulator TYQ-14A Tank Top Heaters GR-121 20-032-0002Regulator 099415-18 Unvented LP gas heatersRegulator 103406-01 output 3-6" used on BNG150T

$16.00

$10.00

$20.00

This high pressure regulator is set at 10psi. It was used primarily on LP convection heaters. It is the same as Desa part# 113819-01 and also goes by 130-00. The tank connector comes pre-attached. also LPA2010 Regulator 2315555 Dyna Glo Nat Gas RA100NGDGD This regulator was used primarily on tank top infra red heaters made by Scheu Mfg. Brands include Universal and All Pro. Also part# 113862-01
Regulator 10psi 6256POL also part# 6256 also LPA2010Regulator 2315555 Dyna Glo Nat Gas RA100NGDGD NLARegulator 28" w.c. 6257 or 113862-01 or 7020A-28

$14.00

$22.00

$30.00

This regulator was used on tank top heaters made by Desa. Brands include Reddy, Master and Heat Demon The LPA2060 regulator is adjustable from 4-14psi The input size of the regulator is 1/4" This low pressure regulator has an output of 11". It has a tank connector already attached. This regulator is used primarily on 150K btu LP gas heaters. Same as Desa part # LPA2100 and 230-00
Regulator LPA2025 tank top also F273606 and E73410 or 7919Regulator LPA2060 Adjustable 4-14psiRegulator LPA2100 Used primarily on 150K LP htrs 11"w.c. 6255

$22.00

$30.00

$15.00

This relay was used primarily on 100k btu LP heaters made by Desa. Brands include Reddy, Remington and Master Solenoid Valve 103015-01 LP gas heaters also part# 6100
Relay 103847-01 LP100 also 1811 & 113875-01Solenoid Valve 098201-01 used on 375K btu LP htrsSolenoid Valve 103015-01 LP gas heaters also part# 6100

$26.00

$200.00

$161.00

The 22-604-0005 spark module was used on LP heaters made by Pinnacle This 28774 is a combination spark plug and flame sensor used on 170k btu LP heaters made by Desa. Brands include Reddy, Remington and Master.
Solenoid Valve 103403-01 Master BNG150TSpark Module 22-604-0005 Heatstream Pro Temp 22-604-0001Spark Plug 28774 170k btu LP heaters also 113963-01 2301974

$100.00

$28.00

$30.00

This nut is used with spark plug # HA3013 or PP212 This brass t block allows you to connect multiple LP tanks together. It is used with hose # 1630RU or 1662 pigtails. This can be used with LP tanks 250lb and smaller. Tank Collar Bracket TT30C-02 used on TT30 heaters
Spark plug nut M29824 or 113886-01 or 3037T block manifold P400Tank Collar Bracket TT30C-02 used on TT30 heaters

$2.00

$15.00

$6.00

This piezo ignitor is used on all 30K btu tank top heaters made by Pinnacle. Brands include Pro Temp, Heat Hog,Utilitech, MegaHeat, Mi T M and more This regulator is used on 30K btu tank top heaters made by Pinnacle. Brands include Pro Temp, Heat Hog, Utilitech, Mega Heat and Mi T M. This regulator is used on 15K btu tank top heaters made by Pinnacle. Brands include Pro Temp, Heat Hog, Utilitech, Mega Heat and Mi T M.
Tank Top heater piezo ignitor 20-122-0002 also 20-122-0001Tank Top heater regulator 20-032-0002 TAY or F237314,TYQTank Top heater regulator assy 20-032-0001 15K BTU

$10.00

$16.00

$11.00

This safety valve is used on all tank top heaters made by Pinnacle. Brands include Pro Temp, Heat Hog,Utilitech, MegaHeat, Mi T M and more. This 8 ft cord has clips that allow you to test motors and transformers and anything you may have.
Tank Top heater safety valve 20-013-0001Test Cord T100-50Thermal Switch 2201153 300K btu Dyna Glo LP heaters

$26.00

$16.00

$10.00

This thermal limit switch was used on all 50K btu Dyna Glo and Thermoheat LP heaters. It was also used on the following 150k btu models; FA150A, FA150DG, FA150DGD This thermal switch was used on all 60K btu Dyna Glo and Thermoheat forced air LP heaters. This #8301 13" Thermocouple was used on some Universal and All Pro patio heaters. Models include 45PHS, 44PHW and more
Thermal Switch 2201563 50K 150K btu Dyna Glo Thermoheat LP HtrsThermal Switch 2201599 60K btu Dyna Glo ThermoheatThermocouple 8301 Patio Heater 13"

$8.00

$8.00

$29.00

This thermocouple is used on all Tank Top heaters made by GHP. Brands include Dyna Glo and Thermoheat. This 39" thermocouple was used on many unvented gas heaters made by Desa. Brands include Vanguard, Comfort Glow and many more. THIS IS USED ONLY ON UNVENTED GAS HEATERS This thermocouple was used primarily on convection (trash can) type LP gas heaters. It is 19.75" in length. The tip is 2" in length.
Thermocouple TT15C-11 12" long Tank Top Htrs 23-3560Thermocouple 098514-01 39" long gas heaters and fireplacesThermocouple 099236-01 also 6233 and 6234

$10.00

$16.00

$12.00

This thermocouple was used on 35K, 50K, and 100K btu LP heaters made by Desa. Brands include Remington, Reddy, Master and more. This 23" threaded thermocouple was used primarily on Master model TC100VR radiant heater. Thermocouple for all Dyna Glo & Thermoheat convection heaters Models LPC80 and LPC25
Thermocouple 099538-01 18" long Reddy, Remington, Master Thermocouple 107374-01 NO LONGER AVAILABLEThermocouple 1130/1396-210 25-80K btu LP convection heaters

$16.00

$20.00

$9.00

This 1130/1496-210 thermocouple was used on all Dyna Glo and Thermoheat LPC200 convection heaters since 2008 Both Wires are slightly over 8" in length. There are two different 1130/1496 thermocouples. This 113884-01 thermocouple was used on 55-125K btu models made by Desa. Brands include Reddy, Remington and Master.
Thermocouple 1130/1496-210 Dyna Glo 200K BTU LP HTR 10MM nutThermocouple 1130/1496-8mm 200K BTU LP HTR Dyna Glo Thermoheat Thermocouple 113884-01 13" 55-125k btu LP heaters also 26654

$9.00

$9.00

$28.00

This 18" threaded thermocouple was used on various LP Gas heaters made by Desa. Brands include Reddy, Remington, Master and more. This 114121-01 thermocouple is 18" in length. It was used primarily on 35K btu LP heaters. This thermocouple is used on all tank top heaters made by Pinnacle. Brands include Pro Temp, Heat Hog,Utilitech, MegaHeat, Mi T M and more.
Thermocouple 18" 104146-02 also 115264-01 or 113834-02 or 28082Thermocouple 18" 114121-01 or 09352Thermocouple 20-091-0002 Tank Top Heater also 20-091-0001

$20.00

$31.00

$11.00

The 22-504-0002 multi bracket assembly includes the thermocouple, thermal switch and electrode. 22-504-0003 Thermocouple 2201584 Natural Gas Radiant Heater RA100NGDGD This 2304885 thermocouple is used and all of the forced air LP heaters sold by GHP. Brands include Dyna Glo, Thermoheat and Dyna Glo Pro
Thermocouple 22-504-0002 Multi Bracket Assy 22-504-0003Thermocouple 2201591 Nat Gas Heater RA100/250NGDGDThermocouple 2304885 Dyna Glo 40-150K btu LP 1130/1474

$16.00

$8.00

$9.00

This 13" thermocouple was used on LP heaters made by Scheu. Brands include Universal and All Pro The 6803 thermocouple was used primarily in the 30K btu "box" type heater made by Scheu. It was also used on other models Brands include - Universal, All Pro Models include - 30FAS, SPC30 This thermocouple is 33" in length. It was used primiarily in unvented gas heaters
Thermocouple 6654 also 6654NR and 35916Thermocouple 6803 Universal & All Pro 30FAS SPC30 HO6FThermocouple GA183 or 110186-01 or 110183-01 33"

$24.00

$20.00

$20.00

If you have a multi meter, you can test your thermocouple to see if it is defective. This thermocouple and valve replaces part# 115264-01. It was used on the following Desa models: RLP30A, REM30LPA, 35FAC, SPC35, NLP35A, RLLP35A, SPC40 and BLP42A The 104458-01 Bimetal thermostat can be used with heaters made by Desa. It has a slotted shaft.
Thermocouple testThermocouple with valve 104147-04 or 115264-01 or 8079Thermostat 104458-01 used on heaters made by DESA

$10.00

$40.00

$16.00

Thermostat 2201186 Dyna Glo & Thermoheat RMC-FA150NGDGD This knob is used on part# 22264 This is a remote thermostat with a 6 ft cord. It can be used with any oil fired heater and any LP heater that has an automatic ignition.
Thermostat 2201186 Dyna Glo & Thermoheat NO LONGER AVAILThermostat Knob 28772 Mr Heater 8772Thermostat PP234 remote also part# HA1210

$31.00

$4.00

$41.00

This is the tip over switch used on tank top heaters made by GHP. Brands include Dyna Glo and Thermoheat Valve 5051233 60K btu LP heater
Tip Over Switch TT15C-08 Tank Tops and RA18LPDGD also FD4Tube 2315550 fuel tube RA250NG Dyna Glo Delux Nat Gas HtrValve 5051233 60K btu LP heater Dyna Glo Thermoheat

$10.00

$30.00

$28.00

This valve is for a 125K btu LP heater. Brands may include Thermoheat, Dyna Glo or Dyna Glo Pro. Old Part# K-890D-A6 (A) Slightly over 5" in length Valve 5050475 K-890D-A6(B) 150K btu LP heater This valve is for a 150K btu LP heater. Brands may include Thermoheat, Dyna Glo or Dyna Glo Pro. Old Part# K-890D-A6 (B) Slightly over 5" in length Valve 5051237 80K btu LP heater RMC-LPC80DG all years
Valve 5051235 K-890D-A6 125K btu LP heaterValve 5051236 Valve 150K btu LP heater Dyna Glo 5050475 GS22AValve 5051237 80K btu LP heater Dyna Glo LPC80 Series

$28.00

$41.00

$42.00

The K-80D-A5-0 valve is used on all Tank Top heaters made by GHP, Pinnacle, Dura Heat and more Brands include Dyna Glo, Thermoheat, Pro Temp, Dura Heat, Master, Remington, Mi-T-M, Stanley, BE, Dayton and more!!! This valve was used on many different types of LP heaters. If your valve looks exactly like this one, it's probably the same. Try replacing the coil (#7111) shown next to the valve instead of the valve. It is the same as 6104 and 6104NR
Valve K-80D-A5-0 Tank Top heaters GS13Valve 097155-01 Reddy Master LP gas heaters 6104 also 5001423Valve 22-011-0005 40K btu LP heater

$12.00

$22.00

$46.00

The 22-011-0006 valve was used on 50K btu LP heaters made by Pinnacle. Valve 22-011-0018 Heat Hog LP Heater
Valve 22-011-0006 Protemp Master 50K btu LP HeatersValve 22-011-0018 Heat Hog LP HeaterValve 2304933 RMC-FA100A NLA

$31.00

$40.00

$29.00

The 27285 gas valve was used in 55-125K btu LP gas heaters made by Mr Heater Models include - MH55FAV, MH85FAV, MH125FAV, HS55FAV, HS85FAV, HS125FAV, TS55FAV, TS125FAV The 28081 valve was used in 35K btu LP gas heaters made by Mr Heater Valve 5050651 Natural Gas Radiant Heater RA100NGDGD
Valve 27285 Mr Heater 55FAV 85FAV 125FAV Heatstar Buddy ProValve 28081 Mr Heater 35K btu LP Heatstar Buddy ProValve 5050651 Natural Gas RA100NGDGD Dyna Glo NLA

$40.00

$21.00

$40.00

Valve 5050685 LP Radiant Heater RA125LPDGD Valve 5051036 Dyna Glo Thermoheat The 7285 valve assembly was used primarily on older 55K btu lp heaters.
Valve 5050685 LP Radiant Heater Dyna Glo RA125LPDGDValve 5051036 Dyna Glo Thermoheat Valve 7285 Universal, All Pro, Reddy 35-85K BTU 113871-01

$46.00

$31.00

$40.00

This is a small valve coil. Please make sure you need this small valve NOT the larger 7111 valve coil. This is the replacement coil for the 097155-01 and 6104 valve. This 8655 is a ball valve knob insert for an LP heater. Also part# 28655
Valve Coil 00503 smaller than 7111Valve Coil 7111 used in 097155 LP gas valveValve Knob Insert 28655 for LP htr 8655

$9.00

$9.00

$5.00

Adjustable Valve PT-N11B.13 Cabinet Heater RA18LK
Valve PT-N11B.13 Cabinet Heater RA18LK

$34.00