Shop Pro Temp, Master, Remington, HeatStream by Pinnacle

For ProTemp, Heat-Stream, Heat Hog, Pinnacle, Mi-T-M, 2010 and newer Remington & Master Heaters

The 70-054-0100 filter kit is used on all low pressure oil fired heaters made by Pinnacle. The 70-055-0100 Pump adjustment kit includes ball, spring, and adjusting screw. This kit was used in all KFA heaters made by Pinnacle The BR3 hand tight connector connects your regulator to your LP tank
70-054-0100 Filter Kit 70-054-0100 Pinnacle oil fired htrs P010070-055-0100 Pump Adjustment Kit 70-055-0100 Pinnacle Htrs P055Acme Thread Connector Hand Tight BR3 for LP tanks

$10.00

$3.00

$10.00

This TYPE 1 ACME appliance fitting is a wrenchless, user friendly, right hand connector. This air gauge can be used to test ALL low pressure portable oil fired heaters 0-15 PSI. This air gauge is used on all oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro.
Acme Thread Connector G1851 LP Gas 35-100K btu heatersAir Gauge 0-15 psi # HA1180 ALL low pressure htrs also G14490Air Gauge 70-025-0100 Dyna Glo part # 3740-0049-00 or 21-1115

$20.00

$14.00

$14.00

This 70-035-0400 air line is 19" long and will fit any oil fired heater made by Pinnacle The 70-035-0500 air line is used on Pinnacle 200-215K btu oil fired heaters This Tubing has a 1/4" opening. This is a 25ft pc. This is the same as any hose that begins with M50814. You can cut to size.
Air Line 70-035-0400 all Pinnacle htrs 18" 3341-0002Air Line 70-035-0500 Pinnacle 200-215K btu 17"Air Line M50814-07 1/4” x 25 ft

$6.00

$6.00

$48.00

This L.P.G. assembly consists of a U.L. listed 11” W.C. regulator, P.O.L. type tank connection with an excess flow device and a 10 foot length of U.L. listed LPG hose with a 3/8 female flare swivel on the hose end.
Axle 70-041-0115 Pinnacle 70K 125K 135K 220SDR/DFVAxle 70-041-1510 Pinnacle Silent Drive htrsBBQ Regulator and 10ft hose kit 63-5116

$12.00

$12.00

$41.00

These are the screws used for all body rings. They are sold by the pair The 72-035-0210 burner body is used in Pinnacle Radiant htrs Burner Body 75-036-0180 Pinnacle 70SS Radiant Heaters Non stock
Body ring screws FHPF3-5C or 4321-0198-00Burner Body 72-035-0210 Pinnacle Radiant htrsBurner Body 75-036-0180 Pinnacle 70SS Radiant Heaters Non stock

$0.40

$16.00

$12.00

75-036-0100 Burner Head Pro Temp PT-35HS Dayton model 1VNX5 The 70-014-0301 burner head is used on 125K btu heaters made by Pinnacle Brands include - Pro Temp, Master, Remington, Stanley, Mi-T-M, BE, Sunstrean and more The 70-014-1000 burner head was used in 150T & 220T heaters made by Pinnacle
Burner Head 75-036-0100 PT35HS 35K btu Pro Temp, DaytonBurner Head 70-014-0301 Pinnacle 125K btu oil fired htrsBurner Head 70-014-1000 Pinnacle 150T & 220T

$31.00

$20.00

$15.00

This burner head #70-014-0300 is for the 125K btu heater. Brands Include: Pro Temp, Remington, Heat Hog, Reddy, and more The 70-063-0201 burner motor is used on the 600k btu oil fired heater made by Pinnacle Brands include - Master, Remington, Stanley, Dayton, Mi-T-M, John Deere, Dayton possibly more
Burner Head Assy 70-014-0300 125K btu Special OrderBurner Motor 70-063-0200 Pinnacle 400K btu htrsBurner Motor 70-063-0201 Pinnacle 600k btu oil fired heaters

$70.00

$200.00

$400.00

This 2 terminal capacitor is used on 45-70k btu oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro. This 4 terminal capacitor is used on 125-215k btu oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro. This 90-004-1000 capacitor was used in 36-48" fans made by Pinnacle
Capacitor 70-020-0107 10uf 45-70k btu Pro Temp also 70-020-0125Capacitor 70-020-0201 30 ohm 125-215k Pro Temp 3820-0143-00Capacitor 90-004-1000 For fans sold by Pinnacle

$11.00

$24.00

$28.00

This 50-011-0210 fixed castor was used on the PCH cabinet heaters made by Pinnacle This is the circuit board for 45k btu heaters Brands include Pro Temp, Heat Hog, Remington, Master, Dyna Glo and more This board is used on the 70k btu oil fired heater made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro.
Castor rear 50-011-0210 cabinet heaters by PinnacleCircuit Board 70-027-0100 45k btuCircuit board 70-027-0200 70k BTU Mi-T-M 68-3066 main pcb

$8.00

$46.00

$61.00

This board is used on 125k, 175k and 215k btu oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro. The 70-027-0700 circuit board was used on Dayton heater made by Pinnacle Circuit Board 75-025-0400 70k btu Pro Temp Radiant
Circuit board 70-027-0300 125-215k BTU Mi-T-M part# 68-3067 Circuit board 70-027-0700 Dayton 3VE53A 3VE53BCircuit Board 75-025-0400 70k btu Radiant 70SSA 75-025-0490

$61.00

$200.00

$100.00

The 70-027-1005 control board was used on the 220DFV models made by Pinnacle Brands include- Remington, Pro Temp. Master, Stanley, BE, Mi-T-M Circuit Board 22-521-0001 Pro Temp LP Heater The 22-521-0002 circuit board was used on 60-150K btu blower type LP heaters made by Pinnacle
Circuit Board (tstat) 70-027-1005 Remington Master 220DFV Circuit Board 22-521-0001 Pro Temp 40K BTU LP HeaterCircuit Board 22-521-0002 LP Gas Forced Air 60-150K btu

$46.00

$16.00

$15.00

The 22-521-0003 circuit board was used on 150K nat gas and 375K LP gas heaters made by Pinnacle Brands include - Dayton, Pro Temp, Sunstream, Heat Stream and more This circuit board is used on 400-600K BTU heaters imported by Pinnacle. The primary brand was Dayton. The 70-027-0860 circuit board is used on Stanley brand 125-215K btu oil fired heaters
Circuit Board 22-521-0003 Pinnacle 150NG & 375K GFACircuit Board 70-027-0800 400-600K BTUCircuit Board 70-027-0860 Stanley 230 volt circuit board

$31.00

$200.00

$60.00

This 70-027-0875 is the circuit board used in 2014 and older Master MHP215 heaters The 70-027-2005 control board was used on 150T & 220T models made by Pinnacle Brands include - Master, Remington, Pro Temp, BE, Mi-T-M, Stanley and more Circuit Board 72-025-0400 Radiant 125K btu
Circuit Board 70-027-0875 for MHP190-215 also 70-027-0885Circuit Board 70-027-2005 Pinnacle Remington Mastr 150T or 220T Circuit Board 72-025-0400 Radiant 125K btu 2013 and older

$70.00

$61.00

$91.00

The 72-025-0450 circuit board is used on Pinnacle 125K btu Silent Drive radiant heaters Brands include - Master, Remington, Heatstream, Stanley, Protemp The 70-027-1025 is a 10 pin wire connector used on oil fired heaters made by Pinnacle This is the circuit board cover for 175k & 215k btu heaters Brands include Pro Temp, Heat Hog, Remington, Master, Dyna Glo and more
Circuit Board 72-025-0450 Radiant 125K btu. 2014 and newerCircuit Board Connecter 70-027-1025 Remington Master Pro TempCircuit Board Cover 70-009-0300 175 & 215k btu htrs

$80.00

$11.00

$7.00

This is the circuit board cover for 125k btu heaters Brands include Pro Temp, Heat Hog, Remington, Master, Dyna Glo and more The 70-027-2000 circuit board is used on the new Silent Drive heaters made by Pinnacle Model numbers include- MH-150T-DFV, MH-220T-DFV
Circuit Board Cover 70-009-0100 45k & 70 k btu htrsCircuit Board Cover 70-009-0200 125k btuCircuit Board Kit 70-027-2000 Silent Drive 150-220T-DFV Pinnacl

$6.00

$6.00

$100.00

The 70-028-0100 plastic circuit board support is used an all heaters made by Pinnacle Clip Nut M11271-8
Circuit Board Support 70-028-0100 Pinnacle Heaters RemingtonClip Nut M11271-8Combustion chamber 70-010-0300 replaced by 70-011-0300

$4.00

$0.40

$130.00

The 70-011-0200 combustion chamber was used on 70-75K btu heaters made by Pinnacle
Combustion Chamber 70-011-0200 Pinnacle 70/75K btuCombustion Chamber 70-011-0300 Pinnacle 120-135K btu Combustion chamber 70-011-0400 Pinnacle htr 170-175 btu 68-3019

$60.00

$130.00

$130.00

The 70-011-0500 was used on 190K & 215K btu oil fired heaters made by Pinnacle. Also 70-010-0500 Possible brands include - Dayton, Stanley, Pro Temp, Master, Remington, Sun Stream and more
Combustion chamber 70-011-0500 Pinnacle htr 190-220K 70-010-0500Combustion Chamber 70-011-0530 Pinnacle 215KFACombustion Chamber 70-011-1000 Remington 150T-DFV

$130.00

$130.00

$130.00

The 70-011-1010 combustion chamber was used on 220T-DFV heaters made by Pinnacle The 70-033-0200 cord bushing was used on 125-215K btu oil fired heaters made by Pinnacle The 70-032-0200 cord wrap is used on the 400-600k btu oil fired heater made by Pinnacle Brands include - Master, Remington, Stanley, Dayton, Mi-T-M, John Deere, Dayton possibly more
Combustion Chamber 70-011-1010 Pinnacle 220T-DFVCord Bushing 70-033-0200 Pinnacle 125-215K oil fired heatersCord Wrap 70-032-0200 Pinnacle 45K-215K btu oil fired htrs

$130.00

$3.00

$5.00

This is the 70-008-1100 side cover for a 150T heater made by Pinnacle It is approx 15" x 4 1/2" The 75-036-0500 diffusion cap was used on 70K btu radiant heaters made by Pinnacle, possibly others This drain plug is used on 125k, 175k and 215k btu heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro.
Cover side 70-008-1100 Pro temp 150T DFVDiffusion Cap 75-036-0500 Radiant htr 70K BTUDrain Plug 70-002-0105 also 3234-0059-00

$12.00

$18.00

$5.00

The 70-300-0001 duct is used on dual fusion heaters made by Pinnacle. Same as part# 70-300-0010 Brands include- Master, Remington, Mi-T-M, BE, Pro Temp and more The 22-504-0004 multi bracket assy was used on 150NG and some 150T LP heaters made by Pinnacle Brands include - Dayton, ProTemp, Remington, Master. Mi-T-M and more The 22-514-0002 fan was used on 100, 125, 150K btu LP heaters made by Pinnacle
Duct 70-300-0001 Pinnacle Dual Fusion Htrs Master, 70-300-0010Electrode Assy 22-504-0004 Bracket 150k gas htrs 22-603-0002Fan 22-514-0002 Pinnacle 100-150K btu LP & Nat Gas heaters 8"

$15.00

$12.00

$9.00

This fan blade is used on 45k btu oil fired heaters made by Pinnacle. Brands include Pro Temp, Heat Hog, Remington, Dyna Glo, Dyna Pro and more. This fan blade is used on 70k btu oil fired heaters made by Pinnacle. Brands include Pro Temp, Heat Hog, Remington, Dyna Glo, Dyna Pro and more. This fan blade is used on 125k btu oil fired heaters made by Pinnacle. Brands include Pro Temp, Heat Hog, Remington, Dyna Glo, Dyna Pro and more.
Fan 70-024-0100 45K BTU Pro Temp Remington PinnacleFan 70-024-0200 70k btu Pro Temp Remington Mi-T-MFan 70-024-0300 8 5/8" 120K-135 BTU Pro Temp Remington Pinnacle

$8.00

$12.00

$10.00

This fan blade is used on 175k and 215k btu oil fired heaters made by Pinnacle. Brands include Pro Temp, Heat Hog, Remington, Dyna Glo, Dyna Pro and more.
Fan 70-024-0400 175K- 215K btu ProTemp Remington Fan 70-024-0700 Pinnacle 400K BTU oil fired htrsFan 70-024-0800 Pinnacle 600k btu oil fired htrs

$12.00

$61.00

$100.00

This fan guard is used on 125k, 175k, and 215k btu oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro. The 70-016-1000 Pinnacle fan guard is used on the Silent Drive 150T & 220T heaters It is about 10 1/2" in diameter The 70-003-1000 fuel filter is used on dual fusion heaters made by Pinnacle
Fan Guard 70-016-0200 125k-215k also 3221-0032-00 & 3221-0051-00Fan Guard 70-016-2000 Pinnacle 10 1/2" diameterFilter 70-003-1000 Dual Fusion heaters

$10.00

$12.00

$15.00

This filter end cover is used on all oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro. 3231-0093-00 Elbow on back of filter cover The 70-003-0100 fuel filter was used in 45-80K btu heaters
Filter Cover 70-020-0103 Pro Temp Mi-T-M part # 68-3047Filter Cover Elbow 3231-0093-00 also 70-020-0402Filter Fuel 70-003-0100 For 45-80K btu Pinnacle heaters

$9.00

$2.00

$8.00

The 70-003-0200 fuel filter was used in all 125-215K btu heaters made by Pinnacle This fuel filling filter is used on 400-600k btu Dayton heaters made by Pinnacle. This is the half moon shaped filter used on all Desa oil fired heaters that have a round plastic filter cover.Brands include Reddy, Remington, Master, knipco, Koehring and more.
Filter Fuel 70-003-0200 for 125-215K BTU Pinnacle heatersFilter Fuel 70-006-0300 400-600k btu htrFilter Input M29633 Reddy Remington Master Knipco 35-70K btu

$9.00

$16.00

$2.00

This package includes 13 pcs of M29633 input filter. This is the tiny lint filter used on all Desa oil fired heaters that have the rectangular filter cover. Brands include Reddy, Master, Remington and more. This fuel cap is used on all oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro.
Filter Input M29633-13 Bakers DozenFilter lint M11637Fuel cap 28732 or 2151-0003-00 or 2151-0041-00 or 70-006-0120

$15.00

$0.80

$10.00

This 70-006-0125 plastic fuel cap was used on Pinnacle heaters made after 2013 Fuel Cap 70-006-0200 for 400-600k btu htrs Mi-T-M Dayton 3VE53 The 26910 is the gasket for numerous fuel caps. It will work on the following- 70-006-0100, 70-006-0120, 28732, 2151-0003-00 possibly more
Fuel Cap 70-006-0125 Pinnacle 35-215K btu 26959 70-006-0100Fuel Cap 70-006-0200 for 400-600k btu htrs Mi-T-M Dayton 3VE53Fuel Cap Gasket 26910 for 70-006-0100 and 28732 and 70-006-0120

$8.00

$11.00

$3.00

The 70-006-0130 is the large metal fuel cap The 70-006-0135 is the large plastic fuel cap The 70-006-0501 fuel filter is used on the 600k btu oil fired heater made by Pinnacle Brands include - Master, Remington, Stanley, Dayton, Mi-T-M, John Deere, Dayton possibly more
Fuel Cap Metal 70-006-0130 Remington Master Pro TempFuel Cap Plastic Large 70-006-0135 or 70-006-0140 Pinnacle HtrsFuel Filter 70-006-0501 Pinnacle 600K btu oil fired htrs

$15.00

$12.00

$46.00

Fuel filter 72-020-0100 125 Radiant The 75-023-0285 fuel filter is used in the 70SS radiant heaters made by Pinnacle Fuel Gauge 2156-0049-00 65-75K Dyna Glo Thermoheat 70-007-0115
Fuel filter 72-020-0100 125 Radiant also 72-022-0130Fuel Filter 75-023-0285 Pinnacle Radiant inline fuel filterFuel Gauge 2156-0049-00 65-75K BTU also 70-007-0115

$30.00

$5.00

$6.00

This Gauge 70-007-0200 is for Pro Temp Remington and other heaters made by Pinnacle 125-215K btu The 70-007-0215 fuel gauge is 8" long Fuel Gauge 72-022-0100 Radiant 125K btu OFR model
Fuel Gauge 70-007-0200 Pro Temp Remington 125-215KFuel Gauge 70-007-0215 8" Silent Drive Htr also 70-007-0216Fuel Gauge 72-022-0100 Radiant 125K btu OFR model

$10.00

$10.00

$10.00

The 72-022-0110 gauge was used on 125K btu radiant heaters made by Pinnacle The 70-007-0450 Electronic fuel gauge was used on Pinnacle htrs The 75-024 fuel hose was used in 70SS kerosene heaters
Fuel Gauge 72-022-0110 Radiant 125K BTU Sunstream 70-007-0215Fuel Gauge Electronic 70-007-0450 Dual Fusion Silent Drive HtrsFuel Hose 75-024 for 70SS style heaters 75-024-0510 75-024-0740

$10.00

$35.00

$6.00

The 70-036-0015 is a return fuel line used on Silent Drive heaters made by Pinnacle The 70-036-0700 fuel line was used on 400K btu heaters made by Pinnacle The 70-036-1000 fuel line is used on the 600k btu oil fired heater made by Pinnacle Brands include - Master, Remington, Stanley, Dayton, Mi-T-M, John Deere, Dayton posiibly more
Fuel Line 70-036-0015 Silent Drive 150-220K btu HtrsFuel Line 70-036-0700 Pinnacle 400K btu oil fired htrFuel Line 70-036-1000 Pinnacle 600K btu oil fired htr

$10.00

$46.00

$50.00

The 72-023-0210 fuel line was used in the 125K btu radiant heaters mader by Pinnacle Brands include - Pro Temp, Heatstream, Sunstream, Remington, Mi-T-M, Stanley, BE 72-023-0260 Updated to rubber fuel line This 72-023-0300 wire braided fuel line was used on radiant oil fired heaters made by Pinnacle It is 39" in length
Fuel Line 72-023-0210 Pro Temp REPLACED BY 72-023-0260Fuel Line 72-023-0260 Pinnacle radiant htrs also 70-023-0310Fuel Line 72-023-0300 Braided Wire radiant heaters 39"

$40.00

$36.00

$16.00

This 70-036-0500 fuel line is 8.5" long
Fuel Line 8.5" 70-036-0500 fits all Pro Temp use 3341-0008Fuel Tank 70-002-0200 Pinnacle 135K btu Remington MasterFuel Tank 70-002-0300 Pinnacle 175-215K btu heaters

$2.00

$250.00

$181.00

This fuse is used on all oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro. The 75-012-0600 heat plate is used on model PT70SSA Brands include- Master, Remington, Heatstream, Sunstream and more The KR-106A hose and regulator assembly was used on RA18 cabinet heaters made by Dyna Glo and other manufacturers. The hose is 24" long
Fuse 70-027-0101 circuit board 8 amp Mi-T-M part# 68-3068Heat Plate 75-012-0600 PT70SSA +80OFR Radiant htr 12" diameterHose/Regulator assy KR-106A Dyna Glo RA18 Cabinet heaters

$1.00

$71.00

$18.00

This ignitor is used on all oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro. WMI924 is on the unit Ignitor 70-037-0700 400-600K btu Dayton The 70-037-0800 ignitor/transformer is used on the 600k btu oil fired heater made by Pinnacle Brands include - Master, Remington, Stanley, Dayton, Mi-T-M, John Deere, Dayton possibly more
Ignitor 70-037-0300 Pro Temp Dyna Glo also 39E0-0014-00Ignitor 70-037-0700 400-600K btu DaytonIgnitor 70-037-0800 Pinnacle 600K btu oil fired htrs

$38.00

$41.00

$181.00

The 70-037-1000 ignitor was used on nearly all kerosene heaters made by Pinnacle after 2015 Brands include - Pro Temp, Master, Remington, Stanley, Sunstream, Heatstream, Mi-T-M and more Also part# 70-037-0350 Ignitor 72-025-0120 Radiant 125K btu
Ignitor 70-037-1000 Dual Fusion and others 70-037-0350 Ignitor 72-025-0120 Radiant 125K btu 70-037-0350Ignitor 75-025-0200 Radiant 35-55K BTU also 75-025-0100

$46.00

$46.00

$46.00

The 24-122-0003 Piezo Ignitor was used on some LP heaters made by Pinnacle You can use these insulated wires to jumper terminals when testing to see if your photocell is bad. Many other purposes. Sold by the pair. This 1 5/8" diameter knob works on 40k - 150k btu gas forced air heaters made by Pinnacle. Brands include Pro Temp, Heat Hog and Heat Stream.
Ignitor Piezo 24-122-0003 LP htrs by Pinnacle 102445Jumper Wires Insulated 18" T100-02 or T100-82Knob 22-516-0001

$5.00

$8.00

$3.00

The 50-013-0210 knob is used on the 50-013-0160 valve assembly that was used on cabinet heaters made by Pinnacle. This 70-031-0100 thermostat knob is used on all oil fired heaters made by Pinnacle. The 70-031-0130 is a thermostat control knob used on 125-215K btu oil fired heaters made by Pinnacle
Knob 50-013-0210 Cabinet Heater PT18PCHKnob 70-031-0100 Master, Remington, Pro Temp htrs by PinnacleKnob 70-031-0130 Pinnacle 125-215K btu htrs

$3.00

$8.00

$8.00

The 72-040-0100 limit switch was used in the 125K btu radiant heater made by Pinnacle This 30" hose is used with the P400 t block so that you can manifold LP tanks together. This hose has pol fittings on both ends. This motor (and pump assy) works on 45k and 70k btu heaters imported by Pinnacle. Brands include Dyna Glo, Pro Temp, and Heat Hog. Also works in Master and Remington heaters made since 2009
Limit Switch 72-040-0100 Pinnacle 125OFRLP Hose Pigtail 1630RU 30" Connects LP Tanks TogetherMotor 45k, 70K, 75k btu heaters 70-020-0100 NLA

$10.00

$12.00

$100.00

The 70-021-0400 motor is used on 215K btu oil fired heaters made by Pinnacle Brands include- Pro Temp, Remington, Master, Stanley, Mi-T-M, BE, John Deere and more The 22-061-0002 motor was used on 100, 125, 150K btu LP heaters made by Pinnacle The 22-061-0018 motor was used on 375K btu LP gas heaters made by Pinnacle Brands include- Master, Remington, Dayton, Mi-T-M, BE, Stanley and a few more
Motor (square) 70-021-0400 Pinnacle 215K REPLACED BY 70-021-0520Motor 22-061-0002 Pinnacle 100-150K btu LP & Nat Gas htrsMotor 22-061-0018 375K btu LP gas Master, Dayton, 22-061-0003

$120.00

$74.00

$91.00

The round motor 70-020-0400 was used on 175k & 190k btu models 2010 and older The 70-020-1000 motor was used in Pinnacle dual fusion heaters Motor 70-021-0520 170-215K Pro Temp Remington Master by Pinnacl
Motor 70-020-0400 for 175/190k REPLACED BY 70-021-0520Motor 70-020-1000 Dual Fusion models 150-220K btuMotor 70-021-0520 Pinnacle 175-215K btu 70-021-0300 - 70-021-040

$111.00

$101.00

$101.00

The 70-021-0800 fan motor is used on the 600k btu oil fired heater made by Pinnacle Brands include - Master, Remington, Stanley, Dayton, Mi-T-M, John Deere, Dayton possibly more The 72-045-0100 motor was used in 125K btu oil fired radiant heaters made by Pinnacle Motor Assembly 70-020-0500 Pro Temp 215k btu Round Motor
Motor 70-021-0800 Pinnacle 600K btu oil fired htrsMotor 72-045-0100 Pinnacle 125K OFR Radiant heatersMotor Assy 70-020-0500 215k btu Round Motor NLA

$225.00

$54.00

$200.00

The 70-021-0500 motor is used on 45 & 75K btu oil fired heaters made by Pinnacle The 70-021-0510 motor is used on heaters made by Pinnacle Motor Support Bracket 70-020-0108
Motor Square 70-021-0500 for 45-75KFA Pinnacle htrs 70-021-0100Motor Square 70-021-0510 Pinnacle 125-135k btu 70-021-0200Motor Support Bracket 70-020-0108

$70.00

$101.00

$8.00

The 70-020-0610 motor support bracket is needed when converting from a round motor to square motor numbers 70-021-0510 and 70-021-0520 This 70-014-0104 nipple is used on the back of the rotor cover plate on Pinnacle oil fired heaters
Motor Support Bracket 70-020-0600 square motor 45-75K btu htrMotor Support Bracket 70-020-0610 square motor 125K-215K btuNipple 70-014-0104 Pinnacle oil fired heaters

$10.00

$10.00

$2.50

The 75-040-0610 nipple is used in 70K btu radiant heaters made by Pinnacle This nozzle kit is used on 45k btu oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro. Includes seal,washers and spring. This nozzle kit is used on 70k btu oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro. Includes seal,washers and spring.
Nipple 75-040-0610 Pinnacle 70SS radiant heaterNozzle 70-015-0100 for 50k btu Dyna Glo Pro Temp KFA1026Nozzle 70-015-0200 for 60-70kPinnacle Dyna GLO KFA1027 PP208

$6.00

$26.00

$26.00

The 70-015-0205 nozzle was used in the 80K btu oil fired heater made by Pinnacle The 70-015-0210 nozzle is used in the 75K btu oil fired heaters made by Pinnacle Brands include- Master, Remington, Pro Temp, Mi-T-M, Deere and more This nozzle kit is used on 125k btu oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro.
Nozzle 70-015-0205 for 80K btu Pinnacle Dyna Glo Dura HeatNozzle 70-015-0210 for 75k btu Pinnacle Dyna Glo Dura HeatNozzle 70-015-0300 for 120-125K btu Dyna Glo Workhorse KFA1003

$26.00

$26.00

$26.00

The 70-015-0305 nozzle was used in the 135K btu oil fired heater made by Pinnacle, GHP, Dura Heat The 70-015-0310 nozzle was used in the 140K btu oil fired heater made by Pinnacle Brands include- Master, Remington, Pro Temp, Mi-T-M, Stanley, Deere, Sunstream, Heatstream This nozzle kit is used on 170-175k btu oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro.
Nozzle 70-015-0305 for 135K btu Pinnacle GHP dura HeatNozzle 70-015-0310 for 140K btu Pinnacle Dyna Glo Dura HeatNozzle 70-015-0400 for 170-180k btu Pinnacle Dyna Glo Dura Heat

$26.00

$26.00

$26.00

Nozzle 70-015-0410 for 190K btu Pinnacle Dyna Glo Dura Heat This nozzle kit is used on 215k btu oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro. Includes seal,washers and spring. This is the nozzle for a 400k btu heater made by Pinnacle. Brands include Dayton, Pro Temp and Master
Nozzle 70-015-0410 for 190K btu Pinnacle Dyna Glo Dura HeatNozzle 70-015-0500 for 200-220k btu also SP KFA1011Nozzle 70-015-0700 for 400K BTU Heater 2.50 x 80 3VE53A

$26.00

$26.00

$12.00

This 70-015-0750 nozzle is used on some 400k btu heater made by Pinnacle The 70-015-0800 nozzle is used on the 600k btu oil fired heater made by Pinnacle Brands include - Master, Remington, Stanley, Dayton, Mi-T-M, John Deere, Dayton possibly more The 70-015-1000 nozzle is used on the new Dual Fusion silent drive heater made by Pinnacle
Nozzle 70-015-0750 for 400K BTU Heater 2.25 x 80 M6296Nozzle 70-015-0800 Pinnacle 600K btu oil fired htrsNozzle 70-015-1000 Dual Fusion 150T

$12.00

$24.00

$12.00

The 70-015-1010 nozzle is used on the new Dual Fusion silent drive heater made by Pinnacle The 72-036-0100 nozzle works in a 125k btu Pro Temp/ Sun Stream/ Remington radiant htr. Nozzle 75-036-0250 Sun Stream Heat Hog 55-60k btu radiant
Nozzle 70-015-1010 Dual Fusion Silent Drive 220TNozzle 72-036-0100 for 125k btu Pro Temp Sun Stream radiant htrNozzle 75-036-0250 Sun Strm/Heat Hog 55-60 btu radiant .50 x 60°

$20.00

$20.00

$20.00

This is the nozzle for the Pro Temp PT-70-SS or the the Heat Hog HH-70-SS The 75-036-0460 nozzle is used in 80K radiant kerosene fired heaters made by Pinnacle This O Ring can be used on any nozzle in a space heater, that uses an o ring.
Nozzle 75-036-0400 Heat Hog or Remington 70K btu Radiant HtrNozzle 75-036-0460 Pinnacle 80OFR radiantNozzle O Ring #147082 old Toro# 223466 and 31351

$20.00

$30.00

$1.20

Nozzle Seal 3311-0002-00 Dyna Glo Thermoheat The 50-008-0200 was used on cabinet heaters made by Pinnacle ODS pilot PT-N11B.6 model# RA18LPDGD
Nozzle Seal 3311-0002-00 Dyna Glo Thermoheat M8882ODS Pilot Assy 50-008-0200 PCH models Pro Temp Sunstream NLAODS pilot PT-N11B.6 T-couple all RA series cabinet heater 230567

$3.00

$31.00

$16.00

This 70-029-0100 outlet is used on newer oil fired heaters made by Pinnacle after 2013 This photocell is used on all oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro.
Outlet 70-029-0100 Pinnacle heaters after 2013Pad 22-509-0001 Pinnacle 40-150K btu LP heatersPhotocell 70-016-0100 ALSO SP-KFA1007

$10.00

$2.00

$11.00

This photocell is used on 400k btu Dayton heaters made by Pinnacle. It is 22 1/4" in length also 70-016-0160 The 70-016-1000 photocell is used on the new Dual Fusion silent drive heater made by Pinnacle Possible brands include-Remington, Pro Temp, Stanley, Heatstream, Master, Mi-T-M and more
Photocell 70-016-0150 400-600k btu Dayton Heater 70-016-0160Photocell 70-016-1000 Dual Fusion Silent Drive 150T 220TPhotocell 75-038-0200 Protemp & Heat Hog 70SS USE 75-038-0110

$26.00

$8.00

$20.00

The 70-010-0101 photocell bracket was used on oil fired heaters mady by Pinnacle and GHP Brands include - Remington, Master, Pro Temp, Dyna Glo, Thermoheat and more This 30" brass hose is used with the P400 t block so that you can manifold LP tanks together. This brass hose has pol fittings on both ends.
Photocell Bracket 70-010-0101 or 3131-0159-00Pigtail LP brass hose CP2030 or 1662Plate 75-012-0400 PT55SS No Longer Available

$3.00

$10.00

$0.00

This brass tailpiece connects an LP regulator to a propane tank. This type of connector can be used with ALL LP gas heaters. Also part# 6252 and 113791-01 This G1653-3 o ring is used on brass tank connectors, sometimes referred to as POL fittings The 70-032-0150 power cord was used on 45-215K btu oil fired heaters made by Pinnacle
POL LP fitting G1629 also part# 6252 and 6433 and G1690POL O-Ring G1653-3Power Cord 70-032-0150 Pinnacle oil fired heaters

$7.00

$1.25

$11.00

Power cord 70-034-0200 for heaters made by Pinnale The 72-032-0150 power cord is used in conjunction with the 72-025-0400 circuit board This on/off switch is used on all oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro.
Power Cord 70-034-0200 Pinnacle heatersPower Cord 72-032-0150 Pinnacle Radiant HtrsPower switch 70-038-0100

$10.00

$11.00

$5.00

The 70-028-0200 liquid filled gauge was used in 70K & 80K radiant heaters made by Pinnacle. It is 0-15 psi This pump is used on 400k btu Dayton heaters made by Pinnacle.
Power Switch 72-012-0120 Radiant htrs 70-125k btu 75-012-0110Pressure Gauge 70-028-0200 Radiant htr 80OFR Protemp MasterPump 70-020-0700 400k btu htr

$3.00

$35.00

$180.00

The 70-400-0100 pump is used on the dual fusion heaters made by Pinnacle The 70-400-0105 is the fuel pump for Pinnacle heaters, model DFV 220T Pump 70-400-0115 for 220K Silent Drive
Pump 70-400-0100 Silent Drive 150K REPLACED BY 70-400-0115Pump 70-400-0105 Silent Drive REPLACED by 70-400-0115Pump 70-400-0115 for 220K Silent Drive

$131.00

$151.00

$120.00

The 72-027-0100 pump is used on the 125K btu radiant heaters made by Pinnacle Brands include - Master, Mi-T-M, Stanley, Remington, Pro Temp, HeatStream, Sunstream possibly more Pump assy 75-027-0100 Radiant 35K btu Sunstream This plastic cap should be used to protect the threaded brass valve on 40 lb LP tanks and smaller. Directions are print in English on one side and Spanish on the opposite side. Sold individually.
Pump 72-027-0100 Pinnacle 125OFR radiant heatersPump assy 75-027-0100 Radiant 35K btu Sunstream HeatstreamQC Cap

$101.00

$140.00

$0.75

The 24-041-0004 hose and regulator assembly was used on 80k & 200k btu convection heaters made by Pinnacle Brands include - Pro Temp, Master, Remington and more The 22-041-0003 hose and regulator assy was used primarily on Dayton 375K btu LP gas heaters made by Pinnacle
Regulator 24-041-0004 Pinnacle PT-80V PT-200V 5 psi Regulator and hose 22-041-0005 Pinnacle 125GFA heaters 8.3" wcRegulator/hose assy 22-041-0003 Pinnacle Dayton 375K LP htr

$60.00

$36.00

$50.00

Rotor Blades 1/2" M8643 154598 These are the blades used in the rotor slots. These blades work with the 5/8" thick rotor. They are sold by the package of 4. The Desa part number is M8643-2. The Champion/Toro number is 154616.
Rotary Switch 72-012-0100 Pinnacle 125OFR Radiant HeaterRotor Blades 1/2" M8643 154598Rotor Blades 5/8" M8643-2 or 154616 or 604343

$10.00

$10.00

$12.00

079975-02 is a 1/2" steel body ring used on heaters with the 1/2" rotor. Screws are included This steel body ring is 5/8" thick. This was used in most heaters however, 1/2" and 3/4" steel body rings have also been used. Make sure you measure the thickness of your ring. Is the same as 147003. The screws are included. This rotor cover plate was used on nearly all oil fired heaters made by Pinnacle. Brands include Dyna Glo, Dyna Pro, Work Horse, Pro Temp, Heat Hog and more.
Rotor body ring 1/2" 079975-02 or 3541-0022-00 / 70-022-0101Rotor body ring 5/8" 079975-03 or 6833 or 26833 or 3541-0050-00Rotor Cover Plate 70-020-0102 Pinnacle Mi-T-M 68-3045

$10.00

$13.00

$12.00

This insert fits in rotors for heaters made by Desa and Pinnacle. Brands include Master, Reddy, Remington. Pro Temp, Dyna Glo, Dyna Pro and many more. This 1/2" thick rotor kit (w/insert) is used on many oil fired heaters, including Reddy, Remington, Master, Heat Hog, Pro Temp and more. This 3/4" thick rotor was used on older 150k btu oil fired heaters made by desa. Brands include Reddy, Master, Koehring, Knipco and more. The blades are sold separately. Part number for the blades is M8643-3. The white insert is included
Rotor Insert M22009 white plastic insertRotor Kit 1/2" thick PP204 or KFA1000 or 70-022-0100 or M22456-1Rotor Kit 3/4" Thick M22456-3 with blades 71-022-1400

$0.50

$18.00

$40.00

This 5/8" thick rotor kit (w/ insert) is used on 55K btu and 200-215K btu heaters It will also work in Master, Reddy and Remington. Screw used on heaters made by Desa. Primarily used to fasten the top shell to the bottom shell. Brands include Reddy, Remington, Master, Knipco, Koehring and more. Primarily used to fasten the steel plate to the round steel rotor ring, AND to fasten the plastic filter housing to the steel plate. Brands include Reddy, Remington, Master, Knipco, Koehring and more.
Rotor Kit 5/8" thick PP205 or 70-022-0200 or KFA1022 M22456-2Screw 10-24 x 1/2" M15823-27Screw 10-32 x 1" M12461-31 or M12461-32

$18.00

$0.30

$0.12

The 70-400-1000 solenoid valve is used on the DFV150/220 The 22-604-0005 spark module was used on LP heaters made by Pinnacle
Solenoid Valve 22-014-0005 Pinnacle 375K btu LP heaterSolenoid Valve 70-400-1000 DFV150/220K BTU HTRSSpark Module 22-604-0005 Heatstream Pro Temp 22-604-0001

$400.00

$40.00

$24.00

The 24-141-0001 electrode was used on LP gas convection heaters made by Pinnacle Brands include - Master, remington, Dayton, Stanley, Pro Temp, Sunstrean and more This ignitor/spark plug is used on 45k and 70k btu oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro. This ignitor/spark plug is used on 125k, 175k and 215k btu oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro.
Spark Plug 24-141-0001 LP Convection heaters by PinnacleSpark plug 70-052-0100 also SP-KFA1008 45-75K BTU 70-052-0105Spark plug 70-052-0200 125-215K & 400K btu

$12.00

$10.00

$12.00

This spark plug is used on 400k btu Dayton heaters made by Pinnacle. The 70-052-0500 spark plug is used on the 600k btu oil fired heater made by Pinnacle Brands include - Master, Remington, Stanley, Dayton, Mi-T-M, John Deere, Dayton possibly more The 70-052-1000 spark plug is used on the new Dual Fusion silent drive heater made by Pinnacle Possible brands include-Remington, Pro Temp, Stanley, Heatstream, Master, Mi-T-M and more
Spark Plug 70-052-0400 400k btu heaterSpark Plug 70-052-0500 Electrode Pinnacle 600K btu oil fired htrSpark Plug 70-052-1000 Dual Fusion Silent Drive 150T 220T

$16.00

$12.00

$9.00

The 75-075-0200 spark plug is used on 70K btu radiant heaters made by Pinnacle Plastic strain relief used on heaters made by Desa. Brands include Reddy, Remington, Master and more This piezo ignitor is used on all 30K btu tank top heaters made by Pinnacle. Brands include Pro Temp, Heat Hog,Utilitech, MegaHeat, Mi T M and more
Spark Plug 75-075-0200 Radiant 70K btu htrs 75-037-0150Strain relief M11143-1Tank Top heater piezo ignitor 20-122-0002 also 20-122-0001 NLA

$9.00

$0.60

$10.00

This regulator is used on 30K btu tank top heaters made by Pinnacle. Brands include Pro Temp, Heat Hog, Utilitech, Mega Heat and Mi T M. This regulator is used on 15K btu tank top heaters made by Pinnacle. Brands include Pro Temp, Heat Hog, Utilitech, Mega Heat and Mi T M. This safety valve is used on all tank top heaters made by Pinnacle. Brands include Pro Temp, Heat Hog,Utilitech, MegaHeat, Mi T M and more.
Tank Top heater regulator 20-032-0002 TAY or F237314Tank Top heater regulator assy 20-032-0001 15K BTU NO THREADS!Tank Top heater safety valve 20-013-0001

$16.00

$11.00

$26.00

The 20-504-0003 tank top heater bracket was used on LP heaters made by Pinnacle This limit switch is used on 215k btu oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro.
Tank Top Htr Bracket 20-504-0003 for PT32 Pinnacle htrsTemperature limit switch 70-019-0200 210-215k btu htrsTemperature Limit Switch 70-019-1000 Pinnacle 150T-220T DFV

$6.00

$10.00

$6.00

This limit switch is used on all oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro. Sold individually. The T100-50 8 ft test cord has clips that allow you to test motors and transformers and anything you may have. This 13" thermostat sensor is used on all oil fired heaters made by Pinnacle Brands include Pro Temp, HeatHog, Dayton, WorkHorse and more
Temperature limit switch p/n 70-019-0100 40-175k btu 80Test Cord T100-50Thermistor 70-016-0101 temp sensor thermostat

$10.00

$20.00

$2.00

This thermocouple is used on all tank top heaters made by Pinnacle. Brands include Pro Temp, Heat Hog,Utilitech, MegaHeat, Mi T M and more. The 22-504-0002 multi bracket assembly includes the thermocouple, thermal switch and electrode. 22-504-0003 The 24-091-0002 thermocouple was used on 50-80K btu LP convection (trash can style) heaters made by Pinnacle Brands include - Master, Remington, Stanley, Mi-T-M, Dayton, Pro Temp, and possibly more.
Thermocouple 20-091-0002 Tank Top Heater also 20-091-0001Thermocouple 22-504-0002 ALL Pinnacle forced air LP heatersThermocouple 24-091-0002 Pinnacle 50-80K BTU Convection Htrs

$9.00

$11.00

$15.00

The 24-091-0003 thermocouple was used on 200K btu LP convection (trash can style) heaters made by Pinnacle Brands include - Master, Remington, Stanley, Mi-T-M, Dayton, Pro Temp, and possibly more. If you have a multi meter, you can test your thermocouple to see if it is defective. The 70-019-0500 thermostat is used on the 400-600k btu oil fired heater made by Pinnacle Brands include - Master, Remington, Stanley, Dayton, Mi-T-M, John Deere, Dayton possibly more
Thermocouple 24-091-0003 Pinnacle 200K btu convection htrsThermocouple testThermostat 70-019-0500 Pinnacle 400-600K btu oil fired htrs

$15.00

$10.00

$10.00

This TYPE 1 ACME appliance fitting is a wrenchless, user friendly, right hand connector. Max output is 200,000 BTU/hr. Use to connect LP-Cylinders to regulators, hoses and other fittings. This is the tip over switch used on tank top heaters made by GHP. Brands include Dyna Glo and Thermoheat The K-80D-A5-0 valve is used on all Tank Top heaters made by GHP, Pinnacle, Dura Heat and more Brands include Dyna Glo, Thermoheat, Pro Temp, Dura Heat, Master, Remington, Mi-T-M, Stanley, BE, Dayton and more!!!
Thread Connector G1852 BR3 100K-200K btu heatersTip Over Switch TT15C-08 Tank Tops and RA18LPDGD also FD4Valve K-80D-A5-0 Tank Top heaters GS13

$20.00

$10.00

$12.00

The 22-011-0006 valve was used on 50K btu LP heaters made by Pinnacle.
Valve 22-011-0005 40K btu LP heaterValve 22-011-0006 Protemp Master 50K btu LP HeatersValve 22-011-0007 GFA100 LP htr by pinnacle

$46.00

$31.00

$40.00

The 22-011-0017 valve was used on 60K btu forced air LP heaters made by Pinnacle Brands include - Master, Pro Temp, Remington, Sunstream and more Valve 22-011-0018 Heat Hog LP Heater The 50-013-0160 valve was used on cabinet style heaters
Valve 22-011-0017 Pinnacle 60K LP Heaters NLAValve 22-011-0018 Pinnacle LP Heater 125K btuValve 50-013-0160 Cabinet Style Heater 18K btu 50-013-0100

$41.00

$44.00

$51.00

Wheel 70-041-0102 Pinnacle htrs 10" This 10" pneumatic wheel works on most Dyna Glo, Heat Hog, Pro Temp heaters. It replaces part# 70-041-0102 The 70-041-1400 wheel was used in many oil fired heaters made by Pinnacle
Wheel 70-041-0102 Pinnacle htrs 10"Wheel 70-041-0150 NO LONGER AVAILABLEWheel 70-041-1400 Pinnacle htrs 10" x 2" 1/2" arbor

$34.00

$42.00

$20.00

The 70-041-0104 wheel cap is used on 125-400K btu oil fired heaters made by Pinnacle The 70-041-0550 wheel nut is used on heaters made by Pinnacle
Wheel Cap 70-041-0104 Pinnacle 125-400K btu oil fired htrsWheel Nut 70-041-0550 Pinnacle Htrs

$4.00

$2.00

For ProTemp, Heat-Stream, Heat Hog, Pinnacle, Mi-T-M, 2010 and newer Remington & Master Heaters