Shop Dura Heat Parts

 
The BR3 hand tight connector connects your regulator to your LP tank This TYPE 1 ACME appliance fitting is a wrenchless, user friendly, right hand connector. This air gauge is used on all oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro.
Acme Thread Connector Hand Tight BR3 for LP tanksAcme Thread Connector G1851 LP Gas 35-100K btu heatersAir Gauge 70-025-0100 Dyna Glo part # 3740-0049-00 or 21-1115

$10.00

$20.00

$14.00

19" Airline for heaters made by GHP Brands include Dyna Glo, Thermoheat, Workhorse and more! Axle 3551-0088-00 Dyna Glo This L.P.G. assembly consists of a U.L. listed 11” W.C. regulator, P.O.L. type tank connection with an excess flow device and a 10 foot length of U.L. listed LPG hose with a 3/8 female flare swivel on the hose end.
Air Line 3341-0002-00 or 3341-0010-00 or 3341-0007-00 20" 23275Axle 3551-0088-00 Dyna GloBBQ Regulator and 10ft hose kit 63-5116

$6.00

$12.00

$41.00

These are the screws used for all body rings. They are sold by the pair The 2201372 capacitor was used on 150K btu LP heaters Brands include - Dura Heat, Dyna Glo , Thermoheat The 2301390 is a capacitor
Body ring screws PAIR FHPF3-5C or 4321-0198-00Capacitor 2201372 Dura Heat & Dyna Glo 150LP heatersCapacitor 2301390

$0.40

$8.00

$10.00

The 3820-0144-00 capacitor was used on 400K btu heaters The 3820-0257-00 capacitor was used in KFA50DGD and KFA80DGD oil fired heaters It may have been used on other models Capacitor
Capacitor 3820-0144-00 Dyna Glo KFA400DGD ThermoheatCapacitor 3820-0257-00 KFA50DGD KFA80DGDCapacitor 3820-0258-00 350VAC 20UF newer 135K-220K htrs

$33.00

$10.00

$20.00

The 215A-0013-00 was used on a few Dyna Glo & Thermoheat models This circuit board was used on Dyna Glo and Thermoheat 45K btu models made in 2009 This 215A-0048-00 circuit board is used on 50K btu Dyna Glo and Thermoheat heaters made in 2011. Models include KFA50DGD
Circuit Board 215A-0013-00 Display LED 21-1011Circuit Board 215A-0019-00 No longer availableCircuit Board 215A-0048-00 50K Btu Dyna Glo

$5.00

$60.00

$70.00

This circuit board is used on 75-125K btu Dyna Glo and Thermoheat heaters made in 2011. Models include KFA125DGD The 215A-0076-00 circuit board was used on 650K btu oil fired heaters made by GHP Brands include - Dyna Glo, Thermoheat, Dayton Models include Dayton 4XA50C Clip Nut 3131-0182-00
Circuit Board 215A-0073-00 Dyna Glo, Thermoheat, 75-125K Btu Circuit Board 215A-0076-00 Dyan Glo 650K Btu also 215A-0057-00Clip Nut 3131-0182-00

$66.00

$120.00

$0.50

The 2152-0049-00 combustion chamber is 18 1/4" in length. It was used in 170K btu heaters made by GHP Brands include - Dyna Glo, Thermoheat, Dura Heat DFA170CV The 2152-0050-00 combustion chamber is 23" in overall length. It was used in heaters made by GHP Brands include - Dyna Glo, Thermoheat, Dura Heat
Combustion Chamber 2152-0041-00 NO LONGER AVAILABLECombustion Chamber 2152-0049-00 Dyna Glo 170K BtuCombustion Chamber 2152-0050-00 Dyna Glo 200-220K BTU

$129.00

$70.00

$101.00

The 2152-0238-00 combustion chamber was used in 125-135K btu heaters made by GHP Brands include - Dyna Glo, Thermoheat, Dura Heat and more This is the 3221-0057-00 cord wrap for Thermoheat and Dyna Glo heaters This is a rubber drain plug for Thermoheat and Dyna Glo heaters
Combustion Chamber 2152-0238-00 Dyna Glo 125-135K BTUCord Wrap 3221-0057-00Drain Plug 3331-0051-00 also 572176

$70.00

$8.00

$5.00

Dual Heat Dyna Glo pump pressure DHPUMPPRESS The 2201392 ignitor was used on 100K btu forced air LP heaters made by Dyna Glo, Thermoheat and Dura Heat Models include - GFA100, GFA100A, RMC-FA100DGP, RMC-FA100DGP-01 and more The 2201393 electrode was used in 150K btu LP heaters.
Dual Heat Dyna Glo pump pressure DHPUMPPRESSElectrode / Ignitor 2201392 Dyna Glo Thermoheat 100K LP HtrsElectrode 2201393 Spark plug 150K btu LP heater

$5.00

$5.00

$6.00

This ignitor electrode CFM200.14 was used on Dyna Glo RMC-LP200L all years. The 2154-0004-00 Fan Assembly is for Dyna Glo 120-125k btu kerosene
Electrode 2206034 Dyna Glo 70-125K btu LP htrElectrode Ignitor CFM200.14 Dyna Glo RMC-LP200L 23-1047Fan 2154-0004-00 120-130k btu Dyna Glo Thermoheat 8 3/4"

$5.00

$6.00

$11.00

2154-0007-00 This was used on ALL of the 170-210k btu oil fired heaters This 7 1/2" five blade fan was used on 50-65K btu RMC and Dyna Glo heaters Fan guard. About 8" in diameter Normally used on 75K btu and smaller heaters
Fan 2154-0007-00 Dyna Glo 170k-220k btu 8 1/2" also 21-2172Fan 2154-0009-00 50-80K btu Dyna Glo ThermoheatFan Guard 3221-0074-00 8" diameter 75K btu & smaller 21-1078

$15.00

$11.00

$10.00

Fan Guard 3221-0075-00 Dyna Glo Thermoheat 2008 & newer The 3561-0058 is a fan guard for Dayton Model #3VE51F, possibly others This Fan guard is approximately 7 3/4" in diameter Used primarily on 50-70K btu heaters
Fan Guard 3221-0075-00 9" diameter 125K btu & larger 21-1082Fan Guard 3561-0058-00 Dayton Model #3VE51FFan Guard 7 3/4" 3221-0050-00 also 70-016-0700

$10.00

$26.00

$8.00

This fan guard is used on 125k, 175k, and 215k btu oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro. Fan Guard Bushing 3351-0010-00 This Thermoheat or Dyna Glo Pro filter cover was used on heaters that featured Dual BTU Technology
Fan Guard 70-016-0200 125k-215k also 3221-0032-00 & 3221-0051-00Fan Guard Bushing 3351-0010-00Filter Cover 3221-0073-00 NO LONGER AVAILABLE

$10.00

$2.00

$25.00

The 3221-0029-00 filter end cover was used on Dyna Glo Pro and Thermoheat heaters that were just a single btu size This end filter cover was used on various Dyna Glo and Thermoheat dual heat models. Also check out 3221-0073-00 This is the control knob for the Thermoheat and Dyna Glo dual heat models.
Filter Cover 3221-0029-00 Dyna Glo Thermoheat 288310040 572696Filter Cover 3221-0076-00 Dual Heat Dyna Glo Thermoheat Filter Cover Control Knob 2154-0061-00 Control knob NLA

$16.00

$8.00

$10.00

This is the BTU Control Switch used on may of the dual heat models made by GHP. Brands include Dyna Glo, Thermoheat and more. 3231-0093-00 Elbow on back of filter cover This is the fuel filter for the 50-75k btu heaters made by GHP.
Filter Cover Control Switch 2154-0070-00 Dyna Glo ThermoheatFilter Cover Elbow 3231-0093-00 also 70-020-0402Filter Fuel 2155-0005-00 40-80K btu Dyna Glo 572154

$8.00

$2.00

$6.00

Fuel Filter 2155-0001-00 125-215k btu Dyna Glo Thermoheat The triangular sponge filter used in all Dyna Glo and Thermoheat heaters. This filter kit is used in all oil fired heaters made by GHP and CFM. Brands include Dyna Glo, Thermoheat and more
Filter Fuel 2155-0001-00 Dyna Glo 120-220k btu 28780 572155Filter Input 12021005 Triangular sponge Dyna Glo ThermoheatFilter kit #SP-KFA1005 Dyna Glo Thermoheat, Dura Heat KFA1005

$8.00

$3.00

$10.00

This fuel cap is used on all oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro. Filter 3740-0034-00 400K btu Dyna Glo Thermoheat Workhorse This is the 8" long fuel gauge used on 210K BTU Dyna Glo and Thermoheat heaters.
Fuel cap 28732 or 2151-0003-00 or 2151-0041-00 or 70-006-0120Fuel Filter 3740-0034-00 400-650K btu Dyna Glo Thermoheat 572312Fuel Gauge 2156-0052-00 210K BTU or 21-1111

$10.00

$50.00

$6.00

This 5" long fuel gauge was used on 65-75k btu heaters Possible brands are Dyna Glo, Thermoheat, Dyna Glo Pro, Workhorse and more This 8" fuel gauge is for Model KFA125L made by GHP. Possible brands are Dyna Glo, Thermoheat and more The 3341-0009-00 fuel line was used in a few heaters made by GHP
Fuel Gauge 2156-0049-00 65-75K BTU also 70-007-0100 Fuel Gauge 2156-0050-00 125-215K btu Dyna Glo 2156-0051-00 Fuel Line 3341-0009-00 Dyna Glo Dura Heat Thermoheat 10"x .125

$6.00

$6.00

$6.00

The 3740-0031-00 fuel line was used in 400k btu oil fired heaters This fuel line is for the 125K btu heaters It has a .1875 opening. It is 9 3/4" long Fuel Strainer 2155-0007-00 400K btu Dyna Glo Thermoheat Workhors
Fuel Line 3740-0031-00 Dyna Glo Dura Heat 400K btuFuel Line 9 3/4" 3341-0008 or 3341-0019 & 3341-0032Fuel Strainer 2155-0007-00 400K btu Dyna Glo Thermoheat Dura Hea

$30.00

$2.00

$21.00

Fuse 3920-0025-00 Dyna Glo Thermoheat or FA2100 Handle 3231-0073-00 KFA50
Fuse 3920-0025-00 Dyna Glo Thermoheat or FA2100Handle 3231-0073-00 Small Htrs 21-1063 or 70-001-0103Handle 3551-0096-00 Dyna Glo and Thermoheat

$2.00

$3.00

$30.00

This LPA3020 hose regulator assembly works on LP heaters that require an operating pressure of 11-14". Part# 39EO-0005-00 used on 125k btu heaters imported by GHP. The white/black wires are 15 1/2" long. The black ignition wires are 16" long Part# 39EO-0007-00 used on 170-175k btu heaters imported by GHP.
Hose/Regulator assy LPA3020 3/8 x 10 ft hose + 6255 Regulator Ignitor 39E0-0005-00 125k Dyna Glo Pro or Thermoheat wmi924Ignitor 39E0-0007-00 170-175k btu Dyna Glo Thermoheat Workhorse

$36.00

$38.00

$38.00

Ignitor / Transformer for 50K btu Dyna Glo Pro or Thermoheat heater Ignitor 39E0-0021-00 Dyna Glo Thermoheat 400K BTU The 39E0-0071-00 as used on Dyna Glo Deluxe heaters Models include - KFA50DGD, KFA80DGD, KFA135DGD, KFA180DGD, KFA220DGD
Ignitor 39E0-0008-00 50-75k btu Dyna Glo or Thermoheat wmi924Ignitor 39E0-0021-00 Dyna Glo Thermoheat 400K BTU wmi924Ignitor 39E0-0071-00 Some Dyna Glo models ending in DGD, WH, H

$38.00

$38.00

$38.00

The CFM80.06B electrode is used on the LPC80 convection heater...maybe others This knob was used on ALL Dyna Glo and Thermoheat convection heaters since 2008.
Ignitor Electrode CFM80.06B LPC80DG 23-1046Knob CFM80.00-10 used on 25-200K btu convection heaters 23-1025Lead Wire 2201371

$6.00

$5.00

$4.00

This is the temperature limit switch used on 125K BTU Dyna Glo and Thermoheat heaters. This temperature limit switch was used on KFA45DGP-01 and KFA75TDGP-01 heaters Limit Switch 2153-0005-00 KFA210 K btu Dyna Glo Thermoheat
Limit Switch 2153-0001-00 NLA NO REPLACEMENTLimit Switch 2153-0003-00 NLA TRY 70-019-0100Limit Switch 2153-0005-00 KFA210 K btu Dyna Glo Thermoheat

$14.00

$10.00

$8.00

The 2153-0013-00 thermal limit switch was used on 80K & 135K btu heaters Brands include - Dyna Glo, Thermoheat, Dura Heat, Dayton, Profitter This temperature limit switch was used on model KFA75L This temperature limit switch was used on model KFA125L
Limit Switch 2153-0013-00 Dyna Glo, Dura Heat, ThermoheatLimit Switch 2153-0022-00 75K btu Dyna Glo ThermoheatLimit Switch 2153-0023-00 KFA125L Dyna Glo Thermoheat

$9.00

$10.00

$10.00

This temperature limit switch was used on model KFA210L THe 38C0-0032-00 limit switch was used in 400-600K btu heaters. Motor for Dyna Glo 170
Limit Switch 2153-0024-00 KFA210H & L Dyna Glo ThermoheatLimit Switch 38C0-0032-00 Dyna Glo 400-600K btu htrsMotor 3970-0033-00 KFA170 Dyna Glo Thermoheat 21-1037 NLA

$10.00

$8.00

$120.00

Motor 3970-0034-00 45-75Kbtu Dyna Glo Thermoheat The 3970-0211-00 motor was used in 125K btu heaters. Motor assy 3970-0212-00 for Dyna Glo, Thermoheat and Dura Heat oil fired heaters
Motor 3970-0034-00 NO LONGER AVAILABLEMotor 3970-0211-00 Dyna Glo Dura Heat 125K btuMotor assy 3970-0212-00 Dyna Glo Thermoheat 175-180K btu

$120.00

$125.00

$150.00

This nozzle kit is used on 45k btu oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro. Includes seal,washers and spring. This nozzle kit is used on 70k btu oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro. Includes seal,washers and spring. The 70-015-0305 nozzle was used in the 135K btu oil fired heater made by Pinnacle, GHP, Dura Heat
Nozzle 70-015-0100 for 50k btu Dyna Glo Pro Temp KFA1026Nozzle 70-015-0200 for 60-70kPinnacle Dyna GLO KFA1027 PP208Nozzle 70-015-0305 for 135K btu Pinnacle GHP dura Heat

$26.00

$26.00

$26.00

This nozzle kit is used on 170-175k btu oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro. The 3131-0287-00 is a brass nozzle holder that is used on some of the Dyna Glo and Thermoheat 210k btu heaters This is the nozzle holder for KFA75L and possibly other models
Nozzle 70-015-0400 for 170-180k btu Pinnacle Dyna Glo Dura HeatNozzle Holder 3131-0287-00 for some 210K modelsNozzle holder 3231-0178-00 KFA75L Dyna Glo Thermoheat

$26.00

$16.00

$6.00

This is the nozzle holder for the KFA210L model The 3231-0239 nozzle holder was used in Dyna Glo, Thermoheat and Dura heat heaters Models include - KFA50H, KFA80H The SP-KFA1001 nozzle was used on Dyna Glo RMC-KFA45 and Dura Heat DFA-45 heaters possibly more.
Nozzle holder 3231-0180-00 Dyna Glo ThermoheatNozzle holder 3231-0239-00 Dyna Glo ThermoheatNozzle KFA1001 Dyna Glo KFA45 Dura heat DFA45 284-7001-32

$10.00

$14.00

$12.00

The KFA1002 nozzle was used on Dyna Glo RMC-KFA65 and Dura Heat DFA65 heaters, possibly others The nozzle plug goes behind the nozzle on 400K btu heaters by GHP Nozzle Seal 3311-0002-00 Dyna Glo Thermoheat
Nozzle KFA1002 Dyna Glo KFA65 Dura 284-7001-32 NLANozzle Plug 3541-0060-00 KFA400 heaters NO LONGER AVAILABLENozzle Seal 3311-0002-00 Dyna Glo Thermoheat M8882

$26.00

$2.00

$3.00

This is the nozzle for the 400K btu heater made by GHP This spring was used with some nozzles on Desa oil fired heaters. Brands include Reddy, Remington and Master. This is a metal nozzle seal. There are always two used per nozzle. Brands include Reddy, Remington, Master and more.
Nozzle SP-KFA1024 KFA400DGD Thermoheat Dyna Glo Workhorse Nozzle Spring M10809-1 also part# 3431-0010-00Nozzle washer M10659-1 also 4349-0016-00

$20.00

$1.20

$0.46

This photocell was used on the 400K btu heater made by GHP This photocell is used on all oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro. The 70-010-0101 photocell bracket was used on oil fired heaters mady by Pinnacle and GHP Brands include - Remington, Master, Pro Temp, Dyna Glo, Thermoheat and more
Photocell 2153-0007-00 KFA400 Dyna Glo Thermoheat FA1025Photocell 70-016-0100 ALSO SP-KFA1007Photocell Bracket 70-010-0101 or 3131-0159-00

$14.00

$11.00

$3.00

The 3980-0274-00 was used in 50-75K btu oil fired heaters made by GHP and WM This on/off switch was used on model RMC-KFA125TDGD. It might be used on other units also. This is the on/off power switch for the Dyna Glo Pro and Thermoheat space heaters
Power Cord 3980-0274-00 Dyna Glow Dura Heat 50-75KPower switch 39A0-0044-00 Dyna Glo NO LONGER AVAILABLEPower Switch 39A0-0153-00 NO LONGER AVAILABLE

$8.00

$5.00

$4.00

This is the Power Switch 39A0-0191-00 for models KFA75L KFA125L KFA210L Pump 3740-0026-00 400K btu htr Dyna Glo Thermoheat Workhorse The 3740-0060-00 pump was used on 650K btu heaters made by GHP
Power Switch 39A0-0191-00 KFA75L KFA125L KFA210L 21-5070Pump 3740-0026-00 400K btu htr Dyna Glo Thermoheat WorkhorsePump 3740-0060-00 Dyna Glo Dayton Dura Heat 650K btu

$8.00

$290.00

$400.00

The SP-KFA1006 pump adjustment kit was used in all oil fired forced air heaters made by GHP Brands include- Dyna Glo, Thermoheat, Dura Heat, LB White Pump Coupling 3531-0013-00 400K btu Dyna Glo Dura Heat Thermoht Rotor Blades 1/2" M8643 154598
Pump Adjustment Kit KFA1006 Dyna Glo Thermoheat 45-220K btuPump Coupling 3531-0013-00 400K btu Dyna Glo Dura Heat ThermohtRotor Blades 1/2" M8643 154598

$7.00

$5.00

$10.00

These are the blades used in the rotor slots. These blades work with the 5/8" thick rotor. They are sold by the package of 4. The Desa part number is M8643-2. The Champion/Toro number is 154616. 079975-02 is a 1/2" steel body ring used on heaters with the 1/2" rotor. Screws are included This steel body ring is 5/8" thick. This was used in most heaters however, 1/2" and 3/4" steel body rings have also been used. Make sure you measure the thickness of your ring. Is the same as 147003. The screws are included.
Rotor Blades 5/8" M8643-2 or 154616 or 604343Rotor body ring 1/2" 079975-02 or 3541-0022-00 / 70-022-0101Rotor body ring 5/8" 079975-03 or 6833 or 26833 or 3541-0050-00

$12.00

$10.00

$13.00

This is the rotor cover plate for Dyna Glo and Thermoheat heaters 3531-0008-00 or 3531-0027-00 or 288310010 cover plate This insert fits in rotors for heaters made by Desa and Pinnacle. Brands include Master, Reddy, Remington. Pro Temp, Dyna Glo, Dyna Pro and many more. This 1/2" thick rotor kit (w/insert) is used on many oil fired heaters, including Reddy, Remington, Master, Heat Hog, Pro Temp and more.
Rotor Cover Plate 3531-0008-00 or 3531-0027-00 or 288310010Rotor Insert M22009 white plastic insertRotor Kit 1/2" thick PP204 or KFA1000 or 70-022-0100 or M22456-1

$16.00

$0.50

$18.00

This 5/8" thick rotor kit (w/ insert) is used on 55K btu and 200-215K btu heaters It will also work in Master, Reddy and Remington. Screw 4319-0015-00 Flange Screw Solenoid Valve 39A0-0084-00 KFA400 Dyna Glo Dura Heat Thermohea
Rotor Kit 5/8" thick PP205 or 70-022-0200 or KFA1022 M22456-2Screw 4319-0015-00 Flange ScrewSolenoid Valve 39A0-0084-00 KFA400 Dyna Glo Dura Heat Thermohea

$18.00

$0.30

$70.00

This is a spark module for a 2009 RMC-FA100DGP LP Heater Spark plug for 300K btu Dyna Glo and Thermoheat heaters. This ignitor/spark plug is used on 45k and 70k btu oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro.
Spark Module 2201391 Dyna Glo Pro LP HtrSpark Plug 2315582 Dyna Glo Thermoheat FA300DGDLP htrSpark plug 70-052-0100 also SP-KFA1008 45-75K BTU 70-052-0105

$24.00

$28.00

$10.00

Spark Plug SP-KFA1009 Dyna Glo Thermoheat 120-400K btu This spark plug is used on some 210K btu heaters made by GHP. Brands include Dyna Glo and Thermoheat. Thermal limit switch for Dyna Glo and Thermoheat heaters
Spark Plug SP-KFA1009 Dyna Glo Thermoheat 120-400K btuSpark Plug SP-KFA1021 Dyna Glo Thermoheat KFA50DGD-220DGD Thermal Switch 2201373 40K 100K 125K Dyna Glo Thermoheat LP Htrs

$11.00

$10.00

$10.00

This thermocouple is used on all Tank Top heaters made by GHP. Brands include Dyna Glo and Thermoheat. Thermocouple for all Dyna Glo & Thermoheat convection heaters Models LPC80 and LPC25 This 1130/1496-210 thermocouple was used on all Dyna Glo and Thermoheat LPC200 convection heaters since 2008 Both Wires are slightly over 8" in length.
Thermocouple TT15C-11 12" long Tank Top Htrs 23-3560 TT360Thermocouple 1130/1396-210 25-80K btu LP convection heatersThermocouple 1130/1496-210 Dyna Glo 200K BTU LP HTR 10MM nut

$10.00

$9.00

$9.00

This 2304885 thermocouple is used and all of the forced air LP heaters sold by GHP. Brands include Dyna Glo, Thermoheat and Dyna Glo Pro The 38C0-0054-00 temperature sensor (thermostat) is used on all oil fired heaters made by GHP. Brands include Dyna Glo, Thermoheat and Dyna Glo Pro This TYPE 1 ACME appliance fitting is a wrenchless, user friendly, right hand connector. Max output is 200,000 BTU/hr. Use to connect LP-Cylinders to regulators, hoses and other fittings.
Thermocouple 2304885 Dyna Glo 40-150K btu LP 1130/1474Thermostat 38C0-0054-00 Temp Sensor 21-4611Thread Connector G1852 BR3 100K-200K btu heaters

$9.00

$5.00

$20.00

This is the tip over switch used on tank top heaters made by GHP. Brands include Dyna Glo and Thermoheat The 2304946 is used on LP gas heaters Valve 5051233 60K btu LP heater
Tip Over Switch TT15C-08 Tank Tops and RA18LPDGD also FD4Tube 2304946 NO LONGER AVAILABLEValve 5051233 60K btu LP heater Dyna Glo Thermoheat 23-1060

$10.00

$16.00

$41.00

This valve is for a 125K btu LP heater. Brands may include Thermoheat, Dyna Glo or Dyna Glo Pro. Old Part# K-890D-A6 (A) Slightly over 5" in length Valve 5051237 80K btu LP heater RMC-LPC80DG all years The K-80D-A5-0 valve is used on all Tank Top heaters made by GHP, Pinnacle, Dura Heat and more Brands include Dyna Glo, Thermoheat, Pro Temp, Dura Heat, Master, Remington, Mi-T-M, Stanley, BE, Dayton and more!!!
Valve 5051235 K-890D-A6 125K btu NO LONGER AVAILABLEValve 5051237 80K btu LP heater Dyna Glo LPC80 SeriesValve K-80D-A5-0 Tank Top heaters GS13

$28.00

$42.00

$12.00

The 4342-0009-00 is a washer for the Dyna Glo and Thermoheat spark plugs Wheel for 125-210k btu Dyna Glo or Thermoheat heaters
Valve 5051033 Dyna Glo, Dura Heat, Thermoheat 60K LP htrWasher 4342-0009-00 for spark plugWheel 2156-0026-00 for NO LONGER AVAILABLE

$30.00

$1.00

$40.00

Wheel 3720-0017-00 Thermoheat Dyna Glo The 20401U wick fits many different brands of wick heaters including Dyna Glo, Duraheat The 28048 wick works on Dyna Glo wick heaters
Wheel 3720-0017-00 Thermoheat Dyna GloWick 20401U Dyna Glo, Duraheat, Heatmate and more PW27Wick 28048 Dyna Glo and Duraheat wick heaters

$42.00

$10.50

$13.50

The 32225 wick with pins works on many heaters including Dyna Glo, Duraheat, Envirotemp, Kero-World and Redstone. The HA2360-04 wire guard was used on TT360 heaters
Wick 32225 with pins Dyna Glo RMC-95 series 30856 DH-145Wire Guard HA2360-04 Dyna Glo TT360 tank top heater

$13.50

$12.00