Shop ProCom Heaters

 

We stock parts for the Procom line of oil fired heaters

Procom Model numbers include - PCK80T  PCK110VT  PCK160VT  PCK175VT  PCK220VT

ProCom Heating, Inc. is the World’s leading manufacturer of heating appliances.

Procom has patented dual fuel and NexGen dual fuel technologies that are on the forefront of innovation.

The BR3 hand tight connector connects your regulator to your LP tank This air gauge can be used to test ALL low pressure portable oil fired heaters 0-15 PSI.
Acme Thread Connector Hand Tight BR3 for LP tanksAir Gauge 0-15 psi # HA1180 ALL low pressure htrs also G14490Wheel Kit PCK220

$10.00

$14.00

$30.00

The 160037-01 airline is (.25 ID x 18") It is used on Procom model PCK80T The 160073-03 is a control airline used on Procom models PCK110, PCK160, PCK175 and PCK220 It is (.09 ID x 12") These are the screws used for all body rings. They are sold by the pair
Airline 160037-01 Procom model PCK80T (.25 ID x 18")Airline 160037-03 Procom model PCK110-220 (.09 ID x 12") Body ring screws FHPF3-5C or 4321-0198-00

$4.50

$4.50

$0.40

The 160020-02 is a circuit board/thermostat control for the Procom PCK80T oil fired heater. The 160171-01 circuit board is used on Procom models PCK110, PCK160 and PCK175 The 160171-03 programmed variable control was used on model PCK220VT
Circuit Board 160020-02 Procom PCK80TCircuit Board 160171-01 Procom PCK110-175 oil fired htrsCircuit Board 160171-03 Procom PCK220VT or 160020-03

$100.00

$130.00

$130.00

The 160138-01 combustion Chamber was used in Procom model PCK220VT
Combustion Chamber 160134-01 PCK80T ProcomCombustion Chamber 160135-01 Procom PCK110VTCombustion Chamber 160138-01 Procom PCK220VT

$41.00

$50.00

$90.00

Part number 160029-01 is a white nylon elbow used on the metal rotor cover plate on all Procom oil fired heaters. 160011-01 7” diameter, 5 blade fan used in Procom 80K & 110K btu oil fired heaters The 160058-01 fan is 8 1/4" in diameter and was used on Procom models PCK160, PCK175 and PCK220 oil fired heaters
Elbow 160029-01 Procom oil fired heatersFan 160011-01 Procom 80-110K btu heaterFan Blade 160058-01 Procom PCK160-220 oil fired htrs 8 1/4" dia

$2.00

$14.00

$12.00

The 160066-01 plastic fan guard is 7 3/4" in diameter and it is used on Procom models PCK80 and PCK110 The 160066-02 is a 9" diameter plastic fan guard used on Procom models PCK160, PCK175 and PCK220 This is the round filter end cover used on all heaters made by Desa, 70k btu and smaller. Brands include Reddy, Master, Remington and more. The ball, spring, and plugs are not included.
Fan Guard 160066-01 Procom PCK80-110 Oil fired htrFan Guard 160066-02 111037-01A Procom PCK160-220 Oil fired htrsFilter Cover M29609 Reddy, Remington, Master, Desa 35-70K btu

$7.00

$7.50

$5.00

This is the half moon shaped filter used on all Desa oil fired heaters that have a round plastic filter cover.Brands include Reddy, Remington, Master, knipco, Koehring and more. This filter kit was used on all low pressure oil fired heaters made by Desa that were 70k btu or smaller. Brands may include Reddy, Master, Remington, Knipco, Koehring, Desa and more. Includes M29633, M29612-01 and M29632 Brands include Reddy, Master, Remington and more.
Filter Input M29633 Reddy Remington Master Knipco 35-70K btuFilter Kit PP213 Reddy, Master, Remington, Procom htrs HA3014Filter lint M29632

$2.00

$6.00

$0.50

This filter with gasket was used on all low pressure oil fired heaters made by Desa that were 70k btu or smaller. Brands may include Reddy, Master, Remington, Knipco, Koehring, Desa and more. This 160030-01K plastic fuel cap is used on all Procom oil fired heaters. The 160012-02 fuel filter is used on Procom models PCK80 and PCK110
Filter Output M29612-01 30-70K btu Desa htrsFuel Cap 160030-01K with gasket ALL Procom Oil fired heatersFuel Filter 160012-02 Procom PCK80 PCK110

$4.00

$10.00

$8.00

This extra large, high capacity see through fuel filter is twice as big as the original.Works better with dirty diesel than original. Due to size, it should only be used with 100K btu and larger oil fired heaters. The 160038-01 is a lower fuel line used on Procom models PCK80 and PCK110 It is (.25 ID x 4.2") The 160038-02 lower fuel line is (.25 ID x 6.2") It is used on Procom models PCK160, PCK175 and PCK220
Fuel filter M51150-XL High Capacity 160012-01Fuel Line 160038-01 lower Procom PCK80-110 (.25 ID x 4.2") Fuel Line 160038-02 lower Procom PCK160-220 (.25 ID x 6.2")

$7.00

$4.00

$4.00

The 160039-01 is the upper fuel tube used on all Procom oil fired heaters Models include PCK80, PCK110, PCK160, PCK175 and PCK220 The 160139-01 fuel tank was used on the PCK110 heaters made by Procom The 160162-01 fuse is used on the larger Procom oil fired heaters. Models include- PCK110, PCK160, PCK175 and PCK220
Fuel Line 160039-01 upper Procom PCK80-220 (.25 ID x 7")Fuel Tank 160139-01GY Procom 110K btu heaterFuse 160162-01 Procom PCK110-220 oil fired heaters

$4.50

$46.00

$6.00

The 160005-01 gauge is used on Procom PCK80 and PCK110 oil fired heaters The 160005-02 fuel gauge is used on Procom models PCK160, PCK175 and PCK220 heaters
Gauge Fuel 160005-01 Procom PCK80 PCK110Gauge Fuel 160005-02 Procom PCK160-220 oil fired htrsGuard Wire 160075-01 Procom PCK80T

$8.00

$10.00

$6.00

The new, heavy duty PP200SC The 160027-01 knob is used on the Procom PCK80T oil fired heater
Handle 160062-01 Procom 110K btu Hot Surface Ignitor PP200SC Heavy Duty replacement Knob 160027-01 Procom PCK80T oil fired htr

$11.00

$28.00

$6.00

The 160055-01 left side cover was used on Procom PCK110VT oil fired heaters. The 160055-02 left side cover was used in Procom models PCK160VT, PCK175VT and PCK220VT The 160001-01K motor and pump assembly was used on all Procom oil fired heaters
Left Side Cover 160055-01 Procom PCK110TLeft Side Cover 160055-02 Procom 160 to 220K btu htrsMotor / Pump assy 160001-01K all Procom oil fired heaters

$11.00

$25.00

$140.00

The 102001-27 motor was used on 200K btu oil fired heaters made by Desa. This motor is 120 Volt. The 160040-32 nozzle is used on the Procom PCK160VT oil fired heater
Motor 102001-27 200K btu 105183-01 Procom 160001-01Motor Mount Bracket 160099-01 Procom PCK80Nozzle 160040-20 Procom PCK160 100735-20

$130.00

$8.00

$16.00

The 160040-32 nozzle is used on the Procom PCK110VT oil fired heater The 160040-32 nozzle is used on the Procom PCK175VT oil fired heater The 160040-41 nozzle is used on the Procom PCK220VT oil fired heater
Nozzle 160040-32 Procom PCK80-110 100735-32Nozzle 160040-39 Procom PCK175 100735-39Nozzle 160040-41 Procom PCK220VT 100735-41

$20.00

$18.00

$30.00

The 160042-01 bracket is used on the following Procom oil fired heaters; PCK80T, PCK110, PCK160 and PCK175 The 160042-02 nozzle bracket is used on the Procom PCK220 oil fired heater The 104054-01 is the tan holder for the 125T and 170T btu heaters made by DESA Make sure you are ordering the correct holder per the owners manual. This is the only tan holder.
Nozzle Bracket 160042-01 Procom PCK80-175 oil fired htrsNozzle Bracket 160042-02 Procom PCK220 oil fired htrsNozzle holder 104054-01 125T and 170T also Procom 160028-01

$4.50

$5.00

$3.00

The 160028-02 is the aluminum nozzle adapter that is used on Procom PCK220VT models This nozzle is for 150k, 155k and 165k btu heaters. This is the same as part numbers HA3028 and 100735-20. This nozzle is packaged in a ziplock bag, NOT a blister pack. The NDD1308X600 ODS Pilot Assy was used on Procom Wall Heaters
Nozzle Holder 160028-02 Procom 220K BTU modelsNozzle PP222 for 150-165K Reddy Remington 160040-20 100735-20ODS Pilot NDD1308X600 Procom LP Gas wall heaters

$10.00

$20.00

$30.00

This photocell should be used with the 104068-02 or 116111-01 ignition control boards on oil fired heaters made by Desa (heaters with a hot surface ignitor). Brands include Reddy, Remington, Master and more. 118418-01 was used on heaters made by DESA. The 160021-01 power cord is used on all Procom oil fired heaters
Photocell PP236 or M16656-24 M16656-21 160016-01Power Cord 118418-01 with receptaclePower Cord 160021-01 used on all Procom oil fired htrs

$16.00

$10.00

$7.00

The 160106-01 air pump adjusting screw is used on the following Procom oil fired heaters - PCK110, PCK160, PCK175, PCK220 This kit includes the ball, spring, plastic plug and plastic adjusting screw. This is the same as part number PP217. These are packaged in a ziploc bag, NOT blister packed. Steel ball used in air pump systems for every low pressure oil fired heater made by Desa. Brands include Reddy, Master, Remington, Knipco, Desa, Koehring and more.
Pump Adjusting Screw 160106-01 Procom PCK110-220 oil fired htrsPump adjustment kit PP217 or HA3020Pump Ball M8940 also Procom 160053-01 or 6850

$2.00

$3.00

$1.00

This is the small plastic plug used on every filter end cover for all low pressure heaters made by Desa. The current plug is yellow. Other colors have been used in the past. The 24-9942 regulator was used on a few models of Procom and Kozy heaters The regulator is a 10" wc output. It has RV81F1-10 on the unit. The 160056-01 right side cover was used on Procom PCK110VT oil fired heaters.
Pump Plug 160024-01 or Desa M22997Regulator 24-9942 Procom, Kozy htr 10" wc RV81F1-10 NLARight Side Cover 160056-01 Procom PCK110

$1.50

$30.00

$13.00

The 160056-02 right side cover was used in Procom models PCK160VT, PCK175VT and PCK220VT This steel body ring is 5/8" thick. This was used in most heaters however, 1/2" and 3/4" steel body rings have also been used. Make sure you measure the thickness of your ring. Is the same as 147003. The screws are included. This insert fits in rotors for heaters made by Desa and Pinnacle. Brands include Master, Reddy, Remington. Pro Temp, Dyna Glo, Dyna Pro and many more.
Right Side Cover 160056-02 Procom PCK160 to PCK220Rotor body ring 5/8" 079975-03 or 6833 or 26833 or 3541-0050-00Rotor Insert M22009 white plastic insert

$25.00

$13.00

$0.50

This 5/8" thick rotor kit (w/ insert) is used on 55K btu and 200-215K btu heaters It will also work in Master, Reddy and Remington. The 160189-01 plate is used on all models of Procom oil fired heaters This is the black rubber gasket that the M50876 filter slides through. Used on heaters made by Desa. Brands include Reddy, Remington, Master.
Rotor Kit 5/8" thick PP205 or 70-022-0200 or KFA1022 M22456-2Rotor Plate 160189-01 all Procom oil fired heatersRubber filter gasket M10990-3 bushing OR Procom 160034-01

$20.00

$10.00

$1.00

The 160089-01 screw is for the rotor cover plate on Procom oil fired htrs The MRT-01 valve is used on Procom heaters
Screw 160089-01 for rotor cover plate Procom oil fired htrsUpper Shell 160050-01GY Procom PCK80TValve MRT-01 Procom fireplace insert

$0.20

$31.00

$91.00

 

We stock parts for the Procom line of oil fired heaters

Procom Model numbers include - PCK80T  PCK110VT  PCK160VT  PCK175VT  PCK220VT

ProCom Heating, Inc. is the World’s leading manufacturer of heating appliances.

Procom has patented dual fuel and NexGen dual fuel technologies that are on the forefront of innovation.