Shop Dyna Glo, Thermoheat, Dura Heat, Workhorse,LP and oil fired htrs

 

 

This TYPE 1 ACME appliance fitting is a wrenchless, user friendly, right hand connector. This TYPE 1 ACME appliance fitting is a wrenchless, user friendly, right hand connector. Max output is 200,000 BTU/hr. Use to connect LP-Cylinders to regulators, hoses and other fittings. This air gauge can be used to test ALL low pressure portable oil fired heaters 0-15 PSI.
Acme Thread Connector G1851 LP Gas 35-100K btu heatersAcme Thread Connector G1852 100K-200K btu heatersAir Gauge 0-15 psi # HA1180 ALL low pressure htrs also G14490

$20.00

$20.00

$14.00

This air gauge is used on all oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro. 19" Airline for heaters made by GHP Brands include Dyna Glo, Thermoheat, Workhorse and more!
Air Gauge 70-025-0100 Dyna Glo part # 3740-0049-00 or 21-1115Air Line 3341-0002-00 or 3341-0010-00 or 3341-0007-00 20" 23275Axle 3551-0088-00 Dyna Glo

$14.00

$6.00

$12.00

This L.P.G. assembly consists of a U.L. listed 11” W.C. regulator, P.O.L. type tank connection with an excess flow device and a 10 foot length of U.L. listed LPG hose with a 3/8 female flare swivel on the hose end. These are the screws used for all body rings. They are sold by the pair The 284-7112-000 burner head was used on older Workhorse heaters
BBQ Regulator and 10ft hose kit 63-5116Body ring screws FHPF3-5CBurner Head 284-7112-000 older Workhorse heaters

$41.00

$0.40

$5.00

The 284-7112-100 burner head includes the nozzle and spark plug The 284-7112-110 burner head was probably used on older 110K btu Workhorse heaters Burner Head Assy 2152-0020-00 KFA45 Dyna Glo Thermoheat
Burner Head 284-7112-100 older Workhorse heaters NLABurner Head 284-7112-110 older Workhorse heatersBurner Head Assy 2152-0020-00 KFA45 Dyna Glo Thermoheat

$20.00

$5.00

$40.00

Burner Head Assy 3531-0015-00 KFA45 Dyna Glo Thermoheat The 2201372 capacitor was used on 150K btu LP heaters Brands include - Dura Heat, Dyna Glo , Thermoheat Capacitor 2201390 Dyna Glo & Thermoheat RMC-FA150NGDGD
Burner Head Assy 3531-0015-00 KFA45 Dyna Glo ThermoheatCapacitor 2201372 Dura Heat & Dyna Glo 150LP heatersCapacitor 2201390 Dyna Glo & Thermoheat RMC-FA150NGDGD

$12.00

$8.00

$6.00

The 2301390 is a capacitor Capacitor 3820-0142-00 Dyna Glo, Thermoheat 45-65k btu htrs The 3820-0144-00 capacitor was used on 400K btu heaters
Capacitor 2301390 Capacitor 3820-0142-00 Dyna Glo, Thermoheat 45-65k btu htrsCapacitor 3820-0144-00 Dyna Glo KFA400DGD Thermoheat

$10.00

$10.00

$33.00

The 3820-0257-00 capacitor was used in KFA50DGD and KFA80DGD oil fired heaters It may have been used on other models Capacitor The 215A-0013-00 was used on a few Dyna Glo & Thermoheat models
Capacitor 3820-0257-00 KFA50DGD KFA80DGDCapacitor 3820-0258-00 350VAC 20UF newer 135K-220K htrsCircuit Board 215A-0013-00 Display LED 21-1011

$10.00

$20.00

$5.00

This circuit board was used on Dyna Glo and Thermoheat 45K btu models made in 2009 This 215A-0048-00 circuit board is used on 50K btu Dyna Glo and Thermoheat heaters made in 2011. Models include KFA50DGD This 215A-0074-00 circuit board works on Dyna Glo and Thermoheat
Circuit Board 215A-0019-00 45K-65k-120k Btu older Dyna Glo NLACircuit Board 215A-0048-00 50K Btu Dyna GloCircuit Board 215A-0074-00 same as 215A-0026-00

$60.00

$70.00

$60.00

The 215A-0075-00 main circuit board was used on 400K btu Dyna Glo and Thermoheat heaters, Replaces 215A-0056-00 The 215A-0005-00 is the small circuit board that the t-stat knob slides on also 21-1012 This was used on older Dura Heat and Dyna Glo 45K-170K btu oil fired heaters. The 215A-0015-00 is the circuit board used on older Dura Heat and Dyna Glo 45K-170K btu oil fired heaters.
Circuit Board 215A-0075-00 KFA400DGD 400K 215A-0056-00Circuit Board (small) 215A-0005-00 old Dyna Glo NLACircuit Board 215A-0015-00 used on older Dyna Glo 45-170K btu

$86.00

$16.00

$41.00

The 215A-0026-00 is a circuit board
Circuit Board 215A-0020-00 KFA210TL NLACircuit Board 215A-0023-00 NO LONGER AVAILABLECircuit Board 215A-0026-00 NO LONGER AVAILABLE No replacement

$0.00

$0.00

$121.00

This circuit board is used on 75-125K btu Dyna Glo and Thermoheat heaters made in 2011. Models include KFA125DGD The 215A-0076-00 circuit board was used on 650K btu oil fired heaters made by GHP Brands include - Dyna Glo, Thermoheat, Dayton Models include Dayton 4XA50C Circuit Board 2201181 Dyna Glo & Thermoheat 150k Nat Gas Htr RMC-FA150NGDGD
Circuit Board 215A-0046-00 75-125K Btu Dyna Glo or 215A-0073-00Circuit Board 215A-0076-00 Dyan Glo 650K Btu also 215A-0057-00Circuit Board 2201181 Dyna Glo & Thermoheat 150k Nat Gas Htr

$66.00

$81.00

$131.00

Clip Nut 3131-0182-00Combustion Chamber 21-2133 Dura Heat DFA70Combustion Chamber 2152-0041-00 Dyna Glo Dura Heat 210K

$0.50

$61.00

$101.00

The 2152-0049-00 combustion chamber is 18 1/4" in length. It was used in 170K btu heaters made by GHP Brands include - Dyna Glo, Thermoheat, Dura Heat DFA170CV The 2152-0050-00 combustion chamber is 23" in overall length. It was used in heaters made by GHP Brands include - Dyna Glo, Thermoheat, Dura Heat
Combustion Chamber 2152-0049-00 Dyna Glo 170K BtuCombustion Chamber 2152-0050-00 Dyna Glo 200-220K BTUCombustion Chamber 2152-0116-00 Dyna Glo Dura Heat 75K

$81.00

$101.00

$101.00

Combustion Chamber 2152-0119-00 KFA210L KFA210H The 2152-0238-00 combustion chamber was used in 125-135K btu heaters made by GHP Brands include - Dyna Glo, Thermoheat, Dura Heat and more
Combustion Chamber 2152-0118-00 Dyna Glo Thermoheat 190KCombustion Chamber 2152-0119-00 KFA210L KFA210HCombustion Chamber 2152-0238-00 Dyna Glo 125-135K BTU

$111.00

$130.00

$81.00

The 3221-0041 cord wrap was used on a 76K btu Dyna Glo heater and possibly others This is the 3221-0057-00 cord wrap for Thermoheat and Dyna Glo heaters This is a rubber drain plug for Thermoheat and Dyna Glo heaters
Cord Wrap 3221-0041-00 Dyna Glo 75KCord Wrap 3221-0057-00Drain Plug 3331-0051-00 also 572176

$12.00

$8.00

$5.00

This 4329-0072-00 is a drain plug for older heaters Dual Heat Dyna Glo pump pressure DHPUMPPRESS This spark plug (ignitor) is used on Dyna Glo and Thermoheat 40K btu LP heaters
Drain Plug 4329-0072-00Dual Heat Dyna Glo pump pressure DHPUMPPRESSElectrode / Ignitor 2201375 Dyna Glo Thermoheat 40K LP Htrs

$4.00

$5.00

$6.00

The 2201392 ignitor was used on 100K btu forced air LP heaters made by Dyna Glo, Thermoheat and Dura Heat Models include - GFA100, GFA100A, RMC-FA100DGP, RMC-FA100DGP-01 and more Igniter 2206033 Thermoheat
Electrode / Ignitor 2201392 Dyna Glo Thermoheat 100K LP HtrsElectrode / Ignitor 2206033 Thermoheat FA60DGDElectrode 2206034 Dyna Glo 70-125K btu LP htr

$5.00

$5.00

$5.00

Electrode Ignitor CFM200.14 Dyna Glo RMC-LP200L 23-1047 Fan 2154-0004-00 120-130k btu Dyna Glo Thermoheat 8 3/4" Fan 2154-0007-00 Dyna Glo 170k-220k btu 8 1/2" also 21-1044
Electrode Ignitor CFM200.14 Dyna Glo RMC-LP200L 23-1047Fan 2154-0004-00 120-130k btu Dyna Glo Thermoheat 8 3/4"Fan 2154-0007-00 Dyna Glo 170k-220k btu 8 1/2" also 21-1044

$6.00

$11.00

$15.00

This 7 1/2" five blade fan was used on 50-65K btu RMC and Dyna Glo heaters Fan 2154-0010-00 Dyna Glo Thermoheat 7" Fan 2304936 8" diameter 150K btu LP heater
Fan 2154-0009-00 50-80K btu Dyna Glo ThermoheatFan 2154-0010-00 Dyna Glo Thermoheat 7"Fan 2304936 8" diameter 150K btu LP and NG Dyna Glo htrs

$11.00

$16.00

$10.00

Fan guard. About 8" in diameter Normally used on 75K btu and smaller heaters Fan Guard 3221-0075-00 Dyna Glo Thermoheat 2008 & newer The 3561-0058 is a fan guard for Dayton Model #3VE51F, possibly others
Fan Guard 3221-0074-00 8" diameter 75K btu & smaller 21-1078Fan Guard 3221-0075-00 9" diameter 125K btu & larger 21-1082Fan Guard 3561-0058-00 Dayton Model #3VE51F

$10.00

$10.00

$26.00

This Fan guard is approximately 7 3/4" in diameter Used primarily on 50-70K btu heaters This fan guard is used on 125k, 175k, and 215k btu oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro.
Fan Guard 7 3/4" 3221-0050-00 also 70-016-0700Fan Guard 70-016-0200 125k-215k also 3221-0032-00 & 3221-0051-00Fan Guard Bushing 3351-0010-00

$8.00

$8.00

$2.00

This Thermoheat or Dyna Glo Pro filter cover was used on heaters that featured Dual BTU Technology The 3221-0029-00 filter end cover was used on Dyna Glo Pro and Thermoheat heaters that were just a single btu size This end filter cover was used on various Dyna Glo and Thermoheat dual heat models. Also check out 3221-0073-00
Filter Cover 3221-0073-00 Dual Heat Model KFA210TDGP-02 NLAFilter Cover 3221-0029-00 Dyna Glo Thermoheat 288310040 572696Filter Cover 3221-0076-00 Dual Heat Dyna Glo Thermoheat

$25.00

$16.00

$8.00

This is the control knob for the Thermoheat and Dyna Glo dual heat models. This is the BTU Control Switch used on may of the dual heat models made by GHP. Brands include Dyna Glo, Thermoheat and more. 3231-0093-00 Elbow on back of filter cover
Filter Cover Control Knob 2154-0061-00 Control knob NLAFilter Cover Control Switch 2154-0070-00 Dyna Glo ThermoheatFilter Cover Elbow 3231-0093-00 also 70-020-0402

$10.00

$8.00

$2.00

Fuel Filter for older (2008) Dyna Glo and Workhorse This is the fuel filter for the 50-75k btu heaters made by GHP. Fuel Filter 2155-0009-00 50-70K older Dyna Glo Workhorse
Filter Fuel 2155-0010-00 Older Dyna Glo Workhorse NLAFilter Fuel 2155-0005-00 40-80K btu Dyna Glo also 70-003-0100Filter Fuel 2155-0009-00 50-70K older Dyna Glo Workhorse NLA

$10.00

$5.00

$9.00

Fuel Filter 2155-0001-00 125-215k btu Dyna Glo Thermoheat The triangular sponge filter used in all Dyna Glo and Thermoheat heaters. This filter kit is used in all oil fired heaters made by GHP and CFM. Brands include Dyna Glo, Thermoheat and more
Filter Fuel 2155-0001-00 Dyna Glo 120-220k btu 28780 70-003-0200Filter Input 12021005 Triangular sponge Dyna Glo ThermoheatFilter kit #SP-KFA1005 Dyna Glo Thermoheat, Dura Heat KFA1005

$6.00

$3.00

$10.00

This fuel cap is used on all oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro. Fuel Cap 3231-0122-00 older Dyna Glo The 26910 is the gasket for numerous fuel caps. It will work on the following- 70-006-0100, 70-006-0120, 28732, 2151-0003-00 possibly more
Fuel cap 28732 or 2151-0003-00 or 2151-0041-00 or 70-006-0120Fuel Cap 3231-0122-00 older Dyna GloFuel Cap Gasket 26910 for 70-006-0100 and 28732 and 70-006-0120

$10.00

$12.00

$4.00

The 2155-0011-00 Fuel filter is used in 400-600K btu htrs Filter 3740-0034-00 400K btu Dyna Glo Thermoheat Workhorse This is the 8" long fuel gauge used on 210K BTU Dyna Glo and Thermoheat heaters.
Fuel Filter 2155-0011-00 Dyna Glo, Dura Heat 400-600K BTUFuel Filter 3740-0034-00 400-650K btu Dyna Glo Thermoheat 572312Fuel Gauge 2156-0052-00 210K BTU or 21-1111

$30.00

$50.00

$6.00

This 5" long fuel gauge was used on 65-75k btu heaters Possible brands are Dyna Glo, Thermoheat, Dyna Glo Pro, Workhorse and more This 8" fuel gauge is for Model KFA125L made by GHP. Possible brands are Dyna Glo, Thermoheat and more This is the threaded cap that goes over the fuel gauge It is about 2" in diameter
Fuel Gauge 2156-0049-00 65-75K BTU also 70-007-0100 Fuel Gauge 2156-0050-00 125-175K btu Dyna Glo 2156-0051-00 Fuel Gauge Cap 3231-0123-00 Older Dyna Glo Workhorse

$6.00

$6.00

$3.00

The 3740-0031-00 fuel line was used in 400k btu oil fired heaters This fuel line is for the 125K btu heaters It has a .1875 opening. It is 9 3/4" long Fuel Strainer 2155-0007-00 400K btu Dyna Glo Thermoheat Workhors
Fuel Line 3740-0031-00 Dyna Glo Dura Heat 400K btuFuel Line 9 3/4" 3341-0008 or 3341-0019 & 3341-0009 & 3341-0032Fuel Strainer 2155-0007-00 400K btu Dyna Glo Thermoheat Dura Hea

$30.00

$2.00

$21.00

Fuel Tank 2151-0008-00 Workhorse 120K btuFuel Tank 2151-0009-00 Dyna Glo ThermohaetFuel Tank 2151-0029-00 Dyna Glo Thermoheat KFA210DGD and more

$170.00

$180.00

$180.00

Fuel Tube 2304830 Thermoheat LP gas heater Fuse 3920-0025-00 Dyna Glo Thermoheat or FA2100
Fuel Tube 2304830 Thermoheat LP gas heaterFuse 3920-0025-00 Dyna Glo Thermoheat or FA2100Gas Valve 5050200

$12.00

$2.00

$30.00

Handle 3231-0073-00 KFA50
Handle 3231-0073-00 Small Htrs 21-1063 or 70-001-0103Handle 3551-0096-00 Dyna Glo and ThermoheatHardware Kit HW-KFA1019 for wheel kit 400K btu htr

$3.00

$30.00

$10.00

Hose QG-0008C Dyna Glo & Thermoheat Tank Top Heaters Hose/Regulator 5002614 50-60K btu Dyna Glo Thermoheat LP
Hose 5002721 Dyna Glo LP gas hoseHose QG-008C Dyna Glo & Thermoheat Tank Top Heaters 23-7536Hose/Regulator 5002614 50-60K btu Dyna Glo Thermoheat LP

$56.00

$10.00

$60.00

The KR-106A hose and regulator assembly was used on RA18 cabinet heaters made by Dyna Glo and other manufacturers. The hose is 24" long This LPA3020 hose regulator assembly works on LP heaters that require an operating pressure of 11-14". The 2201369 is a control board for some Dyna Glo and Thermoheat LP heaters
Hose/Regulator assy KR-106A Dyna Glo RA18 Cabinet heatersHose/Regulator assy LPA3020 3/8 x 10 ft hose + 6255 Regulator Ignition Control 2201369 Dyna Glo & Thermoheat LP htrs

$18.00

$36.00

$22.00

This ignitor is used on all oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro. WMI924 is on the unit Part# 39EO-0005-00 used on 125k btu heaters imported by GHP. The white/black wires are 15 1/2" long. The black ignition wires are 16" long Part# 39EO-0007-00 used on 170-175k btu heaters imported by GHP.
Ignitor 70-037-0300 Pro Temp Dyna Glo also 39E0-0014-00Ignitor 39E0-0005-00 125k Dyna Glo Pro or Thermoheat wmi924Ignitor 39E0-0007-00 170-175k btu Dyna Glo Thermoheat Workhorse

$41.00

$41.00

$41.00

Ignitor / Transformer for 50K btu Dyna Glo Pro or Thermoheat heater Ignitor 39E0-0021-00 Dyna Glo Thermoheat 400K BTU Ignitor 39E0-0025-00 125k (2008) Dyna Glo Pro or Thermoheat
Ignitor 39E0-0008-00 50-75k btu Dyna Glo or Thermoheat wmi924Ignitor 39E0-0021-00 Dyna Glo Thermoheat 400K BTU wmi924Ignitor 39E0-0025-00 125k (2008) Dyna Glo or Thermoheat wmi924

$41.00

$41.00

$41.00

Ignitor 39E0-0029-00 Dayton 650K The 39E0-0071-00 as used on Dyna Glo Deluxe heaters Models include - KFA50DGD, KFA80DGD, KFA135DGD, KFA180DGD, KFA220DGD Ignitor Electrode CFM25.09-04B used on LPC25DG
Ignitor 39E0-0029-00 Dayton 650K wmi924Ignitor 39E0-0071-00 Some Dyna Glo models ending in DGD, WH, HIgnitor Electrode CFM25.09-04B used on LPC25DG 23-1045

$41.00

$41.00

$6.00

The CFM80.06B electrode is used on the LPC80 convection heater...maybe others The 102445-01 push button ignitor was used on many different types of gas fired heaters. Brands include Reddy, Remington, Master and many more. This KFA1016 Hardware kit was used on some of the Dyna Glo and Thermoheat oil fired heaters
Ignitor Electrode CFM80.06B LPC80DG 23-1046Ignitor Piezo 102445-01 also SPC694KFA1016 Handle Hardware kit

$6.00

$8.00

$12.00

This knob was used on 40-150K btu Dyna Glo Delux and Dyna Glo Pro LP Gas heaters. This knob will not lie flat as it extends a 1/4" where it connects to the valve The 2101588 knob is used on the FA100DGP model and a few others
Knob 2101451 Dyna Glo LP heater also # 2315926Knob 2101588 Dyna Glo FA100DGP LP htrKnob 2101671 NO LONGER AVAILABLE

$5.00

$4.00

$0.00

This knob was used on ALL Dyna Glo and Thermoheat convection heaters since 2008. Knob PT-N06-24 RA18 Series heaters
Knob CFM80.00-10 used on 25-200K btu convection heaters 23-1025Knob PT-N06-24 RA18 Series heatersLead Wire 2201371

$5.00

$6.00

$4.00

This is the temperature limit switch used on 125K BTU Dyna Glo and Thermoheat heaters. This temperature limit switch was used on KFA45DGP-01 and KFA75TDGP-01 heaters Limit Switch 2153-0005-00 KFA210 K btu Dyna Glo Thermoheat
Limit Switch 2153-0001-00 NLA NO REPLACEMENTLimit Switch 2153-0003-00 NLA TRY 70-019-0100Limit Switch 2153-0005-00 KFA210 K btu Dyna Glo Thermoheat

$14.00

$10.00

$8.00

This temperature limit switch was used on model KFA75L This temperature limit switch was used on model KFA125L
Limit Switch 2153-0013-00 Dyna Glo, Dura Heat, ThermoheatLimit Switch 2153-0022-00 75K btu Dyna Glo ThermoheatLimit Switch 2153-0023-00 KFA125L Dyna Glo Thermoheat

$9.00

$10.00

$10.00

This temperature limit switch was used on model KFA210L The 2304826 bracket will fit many of the heat limit switches used by Dyna Glo and Thermoheat oil fired heaters. This 30" hose is used with the P400 t block so that you can manifold LP tanks together. This hose has pol fittings on both ends.
Limit Switch 2153-0024-00 KFA210H & L Dyna Glo ThermoheatLimit Switch Bracket 2304826 Dyna Glo or ThermoheatLP Hose Pigtail 1630RU 30" Connects LP Tanks Together

$10.00

$1.00

$12.00

Motor 3970-0029-00 125K btu Dyna Glo Thermoheat KFA125TL and others Motor for Dyna Glo 170 Motor 3970-0034-00 45-75Kbtu Dyna Glo Thermoheat
Motor 3970-0029-00 125K btu KFA125TL Dyna Glo Thermoheat NLAMotor 3970-0033-00 KFA170 Dyna Glo Thermoheat 21-1037 NLAMotor 3970-0034-00 45-75Kbtu Dyna Glo Thermoheat NLA

$125.00

$120.00

$120.00

Motor 3970-0210-00 KFA75L and others
Motor 3970-0060-00 NO LONGER AVAILABLE NO REPLACEMENTMotor 3970-0210-00 KFA75L KFA50DGD-KFA125DGD and othersMotor 3970-0211-00 Dyna Glo Dura Heat 125K btu

$0.00

$81.00

$125.00

The 3970-0213-00 motor was used on Dyna Glo model KFA210DGD Motor assy 3970-0212-00 for Dyna Glo, Thermoheat and Dura Heat oil fired heaters Mounting Bolt Knob used on all TT30 tank top heaters made by Dyna Glo and Thermoheat
Motor 3970-0213-00 Dyna Glo KFA210-220Motor assy 3970-0212-00 Dyna Glo Thermoheat 175-180K btuMounting Bolt Knob TT30C-3 all TT30 heaters Dyna Glo Thermoheat

$151.00

$120.00

$3.00

This nozzle kit is used on 45k btu oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro. Includes seal,washers and spring. This nozzle kit is used on 70k btu oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro. Includes seal,washers and spring. This nozzle kit is used on 125k btu oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro.
Nozzle 70-015-0100 for 45k-50k btu also SP-KFA1001 Dyna GloNozzle 70-015-0200 for 65-80k btu also SP KFA1027 PP208Nozzle 70-015-0300 for 120-135K btu Dyna Glo Workhorse KFA1003

$26.00

$26.00

$26.00

This nozzle kit is used on 170-175k btu oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro. This nozzle kit is used on 215k btu oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro. Includes seal,washers and spring. The 3131-0287-00 is a brass nozzle holder that is used on some of the Dyna Glo and Thermoheat 210k btu heaters
Nozzle 70-015-0400 for 170-190k btu also SP-KFA1004 Dyna GloNozzle 70-015-0500 for 210-220k btu also SP KFA1011Nozzle Holder 3131-0287-00 for some 210K models

$26.00

$26.00

$16.00

This is the nozzle holder for KFA75L and possibly other models This is the nozzle adapter for the KFA125L model This is the nozzle holder for the KFA210L model
Nozzle holder 3231-0178-00 KFA75L Dyna Glo Thermoheat Nozzle holder 3231-0179-00 KFA125L NLANozzle holder 3231-0180-00 KFA210L Dyna Glo Thermoheat

$6.00

$6.00

$6.00

The 3231-0239 nozzle holder was used in Dyna Glo, Thermoheat and Dura heat heaters Models include - KFA50H, KFA80H The SP-KFA1001 nozzle was used on Dyna Glo RMC-KFA45 and Dura Heat DFA-45 heaters possibly more. The KFA1002 nozzle was used on Dyna Glo RMC-KFA65 and Dura Heat DFA65 heaters, possibly others
Nozzle holder 3231-0239-00 Dyna Glo ThermoheatNozzle KFA1001 Dyna Glo KFA45 Dura heat DFA45 284-7001-32Nozzle KFA1002 Dyna Glo KFA65 Dura 284-7001-32 NLA

$14.00

$26.00

$26.00

The nozzle plug goes behind the nozzle on 400K btu heaters by GHP Nozzle Seal 3311-0002-00 Dyna Glo Thermoheat This is the nozzle for the 400K btu heater made by GHP
Nozzle Plug 3541-0060-00 KFA400 heaters Dyna Glo ThermoheatNozzle Seal 3311-0002-00 Dyna Glo Thermoheat M8882Nozzle SP-KFA1024 KFA400DGD Thermoheat Dyna Glo Workhorse

$2.00

$1.20

$20.00

This KFA1028 nozzle is for the KFA650DGD 650K btu heater. This spring was used with some nozzles on Desa oil fired heaters. Brands include Reddy, Remington and Master. This is a metal nozzle seal. There are always two used per nozzle. Brands include Reddy, Remington, Master and more.
Nozzle SP-KFA1028 for KFA650DGD Dyna Glo ThermoheatNozzle Spring M10809-1 also part# 3431-0010-00Nozzle washer M10659-1 also 4349-0016-00

$30.00

$1.20

$0.46

ODS pilot PT-N11B.6 model# RA18LPDGD This photocell was used on the 400K btu heater made by GHP This photocell is used on all oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro.
ODS pilot PT-N11B.6 T-couple all RA series cabinet heater 230567Photocell 2153-0007-00 KFA400 Dyna Glo Thermoheat FA1025Photocell 70-016-0100 ALSO SP-KFA1007

$16.00

$14.00

$11.00

The 3980-0274-00 was used in 50-75K btu oil fired heaters made by GHP and WM The 3980-0275-00 power cord was used in 75-220K btu Dura Heat, Dyna Glo and Thermoheat oil fired heaters
Photocell Bracket 70-010-0101 or 3131-0159-00Power Cord 3980-0274-00 Dyna Glow Dura Heat 50-75KPower Cord 3980-0275-00 Dyna Glo Dura Heat 75-80-135-180-220k

$3.00

$8.00

$14.00

Power Switch 2201549 Dyna Glo & Thermoheat RMC-FA150NGDGD This on/off switch was used on model RMC-KFA125TDGD. It might be used on other units also. This is the on/off power switch for the Dyna Glo Pro and Thermoheat space heaters
Power Switch 2201549 Dyna Glo & Thermoheat RMC-FA150NGDGDPower switch 39A0-0044-00 Dyna Glo NO LONGER AVAILABLEPower Switch 39A0-0153-00 NO LONGER AVAILABLE

$3.00

$5.00

$4.00

This is the Power Switch 39A0-0191-00 for models KFA75L KFA125L KFA210L Pump 3740-0026-00 400K btu htr Dyna Glo Thermoheat Workhorse The 3740-0060-00 pump was used on 650K btu heaters made by GHP
Power Switch 39A0-0191-00 KFA75L KFA125L KFA210L 21-5070Pump 3740-0026-00 400K btu htr Dyna Glo Thermoheat WorkhorsePump 3740-0060-00 Dyna Glo Dayton Dura Heat 650K btu

$8.00

$260.00

$360.00

Pump Coupling 3531-0013-00 400K btu Dyna Glo Dura Heat Thermoht
Pump 39A0-0055-00 NO LONGER AVAILABLEPump Adjustment Kit KFA1006 Dyna Glo Thermoheat 45-220K btuPump Coupling 3531-0013-00 400K btu Dyna Glo Dura Heat Thermoht

$0.00

$7.00

$5.00

The SP-KFA1010 includes two balls, springs and adjustment screws Regulator 2315555 Dyna Glo Nat Gas RA100NGDGD Rotor Blades 1/2" M8643 154598
Pump Kit SP-KFA1010 Dyna Glo & ThermoheatRegulator 2315555 Dyna Glo Nat Gas RA100NGDGD NLARotor Blades 1/2" M8643 154598

$10.00

$22.00

$8.40

These are the blades used in the rotor slots. These blades work with the 5/8" thick rotor. They are sold by the package of 4. The Desa part number is M8643-2. The Champion/Toro number is 154616. 079975-02 is a 1/2" steel body ring used on heaters with the 1/2" rotor. Screws are included This steel body ring is 5/8" thick. This was used in most heaters however, 1/2" and 3/4" steel body rings have also been used. Make sure you measure the thickness of your ring. Is the same as 147003. The screws are included.
Rotor Blades 5/8" M8643-2 or 154616 or 604343Rotor body ring 1/2" 079975-02 or 3541-0022-00 / 70-022-0101Rotor body ring 5/8" 079975-03 or 6833 or 26833 or 3541-0050-00

$9.60

$10.00

$13.00

This is the rotor cover plate for Dyna Glo and Thermoheat heaters 3531-0008-00 or 3531-0027-00 or 288310010 cover plate This insert fits in rotors for heaters made by Desa and Pinnacle. Brands include Master, Reddy, Remington. Pro Temp, Dyna Glo, Dyna Pro and many more. This 1/2" thick rotor kit (w/insert) is used on many oil fired heaters, including Reddy, Remington, Master, Heat Hog, Pro Temp and more.
Rotor Cover Plate 3531-0008-00 or 3531-0027-00 or 288310010Rotor Insert M22009 white plastic insertRotor Kit 1/2" thick PP204 or KFA1000 or 70-022-0100 or 572225

$16.00

$0.50

$20.00

This 5/8" thick rotor kit (w/ insert) is used on 55K btu and 200-215K btu heaters It will also work in Master, Reddy and Remington.
Rotor Kit 5/8" thick PP205 or 70-022-0200 or KFA1022 M22456-2Screw 4319-0015-00 Flange ScrewSide Cover 3121-0330-08 Thermoheat Dyna Glo

$20.00

$0.30

$14.00

Solenoid Valve 39A0-0084-00 KFA400 Dyna Glo Dura Heat Thermohea This is a spark module for a 2009 RMC-FA100DGP LP Heater Spark plug for 300K btu Dyna Glo and Thermoheat heaters.
Solenoid Valve 39A0-0084-00 KFA400 Dyna Glo Dura Heat ThermoheaSpark Module 2201391 Dyna Glo Pro LP HtrSpark Plug 2315582 Dyna Glo Thermoheat FA300DGDLP htr

$70.00

$24.00

$28.00

This ignitor/spark plug is used on 45k and 70k btu oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro. Spark Plug SP-KFA1009 Dyna Glo Thermoheat 120-400K btu This spark plug is used on some 210K btu heaters made by GHP. Brands include Dyna Glo and Thermoheat.
Spark plug 70-052-0100 also SP-KFA1008 45-75K BTU 70-052-0105Spark Plug SP-KFA1009 Dyna Glo Thermoheat 120-400K btuSpark Plug SP-KFA1021 Dyna Glo Thermoheat KFA50DGD-220DGD

$20.00

$14.00

$14.00

Tank Collar Bracket TT30C-02 used on TT30 heaters Thermal limit switch for Dyna Glo and Thermoheat heaters
Tank Collar Bracket TT30C-02 used on TT30 heatersThermal Switch 2201153 300K btu Dyna Glo LP heatersThermal Switch 2201373 40K 100K 125K Dyna Glo Thermoheat LP Htrs

$6.00

$10.00

$10.00

This thermal limit switch was used on all 50K btu Dyna Glo and Thermoheat LP heaters. It was also used on the following 150k btu models; FA150A, FA150DG, FA150DGD This thermal switch was used on all 60K btu Dyna Glo and Thermoheat forced air LP heaters. This thermocouple is used on all Tank Top heaters made by GHP. Brands include Dyna Glo and Thermoheat.
Thermal Switch 2201563 50K 150K btu Dyna Glo Thermoheat LP HtrsThermal Switch 2201599 60K btu Dyna Glo ThermoheatThermocouple TT15C-11 12" long Tank Top Htrs 23-3560

$8.50

$8.50

$10.00

Thermocouple for all Dyna Glo & Thermoheat convection heaters Models LPC80 and LPC25 This 1130/1496-210 thermocouple was used on all Dyna Glo and Thermoheat LPC200 convection heaters since 2008 Both Wires are slightly over 8" in length. There are two different 1130/1496 thermocouples.
Thermocouple 1130/1396-210 25-80K btu LP convection heatersThermocouple 1130/1496-210 Dyna Glo 200K BTU LP HTR 10MM nutThermocouple 1130/1496-8mm 200K BTU LP HTR Dyna Glo Thermoheat

$9.00

$9.00

$9.00

Thermocouple 2201584 Natural Gas Radiant Heater RA100NGDGD This 2304885 thermocouple is used and all of the forced air LP heaters sold by GHP. Brands include Dyna Glo, Thermoheat and Dyna Glo Pro Thermostat 2201186 Dyna Glo & Thermoheat RMC-FA150NGDGD
Thermocouple 2201591 Nat Gas Heater RA100/250NGDGDThermocouple 2304885 Dyna Glo 40-150K btu LP 1130/1474Thermostat 2201186 Dyna Glo & Thermoheat NO LONGER AVAIL

$9.00

$9.00

$31.00

The 38C0-0054-00 temperature sensor (thermostat) is used on all oil fired heaters made by GHP. Brands include Dyna Glo, Thermoheat and Dyna Glo Pro This is the tip over switch used on tank top heaters made by GHP. Brands include Dyna Glo and Thermoheat The 2304946 is used on LP gas heaters
Thermostat 38C0-0054-00 Temp Sensor 21-4611Tip Over Switch TT15C-08 Tank Tops and RA18LPDGD also FD4Tube 2304946

$5.00

$10.00

$16.00

The 21EX32 is the tune up kit for a Dayton 3VE50, 125K btu oil fired heaters Valve 5051233 60K btu LP heater
Tube 2315550 fuel tube RA250NG Dyna Glo Delux Nat Gas HtrTune Up Kit 21EX32 Dayton 125K oil fired heaterValve 5051233 60K btu LP heater Dyna Glo Thermoheat 23-1060

$30.00

$125.00

$41.00

This valve is for a 125K btu LP heater. Brands may include Thermoheat, Dyna Glo or Dyna Glo Pro. Old Part# K-890D-A6 (A) Slightly over 5" in length Valve 5050475 K-890D-A6(B) 150K btu LP heater This valve is for a 150K btu LP heater. Brands may include Thermoheat, Dyna Glo or Dyna Glo Pro. Old Part# K-890D-A6 (B) Slightly over 5" in length Valve 5051237 80K btu LP heater RMC-LPC80DG all years
Valve 5051235 K-890D-A6 125K btu LP heaterValve 5051236 Valve 150K btu LP heater Dyna Glo 5050475 GS22AValve 5051237 80K btu LP heater Dyna Glo LPC80 Series

$28.00

$41.00

$42.00

The K-80D-A5-0 valve is used on all Tank Top heaters made by GHP, Pinnacle, Dura Heat and more Brands include Dyna Glo, Thermoheat, Pro Temp, Dura Heat, Master, Remington, Mi-T-M, Stanley, BE, Dayton and more!!! Valve 5050651 Natural Gas Radiant Heater RA100NGDGD
Valve K-80D-A5-0 Tank Top heaters GS13Valve 2304933 RMC-FA100A NLAValve 5050651 Natural Gas RA100NGDGD Dyna Glo NLA

$12.00

$29.00

$40.00

Valve 5050685 LP Radiant Heater RA125LPDGD Valve 5051036 Dyna Glo Thermoheat Adjustable Valve PT-N11B.13 Cabinet Heater RA18LK
Valve 5050685 LP Radiant Heater Dyna Glo RA125LPDGDValve 5051036 Dyna Glo Thermoheat Valve PT-N11B.13 Cabinet Heater RA18LK

$46.00

$31.00

$34.00

The 4342-0009-00 is a washer for the Dyna Glo and Thermoheat spark plugs Wheel for 125-210k btu Dyna Glo or Thermoheat heaters
Washer 4342-0009-00 for spark plugWheel 2156-0026-00 for 125-210K btu Dyna Glo ThermoheatWheel 3720-0004-00 Dyna Glo Thermoheat 400K btu htr

$1.00

$40.00

$70.00

The 20401U wick fits many different brands of wick heaters including Dyna Glo, Duraheat The 32225 wick with pins works on many heaters including Dyna Glo, Duraheat, Envirotemp, Kero-World and Redstone.
Wheel 3720-0017-00 Thermoheat Dyna GloWick 20401U Dyna Glo, Duraheat, Heatmate and more PW27Wick 32225 with pins Dyna Glo RMC-95 series 30856 DH-145

$42.00

$10.50

$13.50

This 2123-0031-00 wick adjusting unit is for the Dyna Glo RMC-55R7 wick heater
Wick Adjusting Unit 2123-0031-00 RMC-55R7

$41.50