Shop Mr Heater Heatstar, Enerco, and Dewalt

 
This TYPE 1 ACME appliance fitting is a wrenchless, user friendly, right hand connector. This TYPE 1 ACME appliance fitting is a wrenchless, user friendly, right hand connector. Max output is 200,000 BTU/hr. Use to connect LP-Cylinders to regulators, hoses and other fittings. This air gauge can be used to test ALL low pressure portable oil fired heaters 0-15 PSI.
Acme Thread Connector G1851 LP Gas 35-100K btu heatersAcme Thread Connector G1852 100K-200K btu heatersAir Gauge 0-15 psi # HA1180 ALL low pressure htrs also G14490

$20.00

$20.00

$14.00

The 28786 air gauge was used on Buddy Pro, Mr Heater and Dewalt heaters with a round filter kit. These are the screws used for all body rings. They are sold by the pair The 28735 is a capacitor for some of the Dewalt, Mr Heater and Heatstar heaters
Air Gauge 28786 for Buddy Pro / Mr Heater / Dewalt 70-025-0100Body ring screws FHPF3-5CCapacitor 28735 for Mr Heater Heatstar Dewalt

$14.00

$0.40

$10.00

This 21866 control assy is used on Mr Heater 50k & 75k btu heaters 2009 and newer. This 21866 control assy is used on Heatstar 50k to 210k btu heaters 2009 and newer This control assy is used on Mr Heater 125k to 210k btu heaters 2009 and newer Circuit Board 23276 Mr Heater Heatstar
Circuit Board 21866 Mr Heater and Heatstar and DewaltCircuit Board 21867 Mr Heater Heatstar Dewalt 125-210K btuCircuit Board 23276 Mr Heater Heatstar Dewalt

$20.00

$33.00

$41.00

The 20300010 electrode was used on Universal models This 22144 electrode was used on nearly all Mr Heater and Heatstar oil fired heaters The 23515 electrode / ignitor was used on Mr Heater and Enerco 125K btu LP nad nat gas heaters
Electrode 20300010 Universal K150FAI 1030002100 or 8436Electrode 22144 Mr Heater / Heatstar / Dewalt 21819 F221857Electrode 23515 Mr Htr 125K btu radiant htr CR805

$14.00

$11.00

$4.00

The 28080 electrode was used on 35K btu lp htrs Electrode 7652 Universal 250S and 250VC also 27652
Electrode 28080 All Pro, Universal, Mr Htr 35K LP htrs 8080Electrode 7652 Universal 250S and 250VC also 27652Fan 26086 Mr Htr LP gas 55FAV and 85FAV

$7.00

$6.00

$8.00

Fan 26866 Mr Heater 175K-210K Heatstar Enerco The 8740 fan works in 75K btu heaters made by Mr Heater 28740 This 21812 is the filter cover used by Mr Heater or Heatstar in their 50 and 75K btu oil fired heaters.
Fan 26866 Mr Heater 170K-210K Heatstar Dewalt also 22108Fan 8740 for MR HTR 75K btu also 28740 7"Filter Cover 21812 Mr Heater Heatstar Dewalt

$18.00

$11.00

$5.00

Plastic filter end cover used on Desa heaters larger than 70k btu. Rectangular in shape. Brands include Reddy, Remington, Master, Knipco, Koehring and more. The ball, spring, and plugs are not included. Fuel Filter 2155-0001-00 125-215k btu Dyna Glo Thermoheat The 50314 fuel filter was used in Heatstar model HS1151R, possibly others
Filter Cover M16545 90-200K btu htrs by DESA Filter Fuel 2155-0001-00 Dyna Glo 120-220k btu 28780 70-003-0200Filter Fuel 50314 Heatstar HS1151R

$5.00

$6.00

$11.00

This is the large rectangular shaped filter used on all oil fired heaters made by Desa that use the rectangular plastic filter cover.Brands include Reddy, Remington, Master, Knipco, Koehring and more. This F221887 filter kit was used on 50k & 75k Mr Heater and Heatstar oil fired heaters 2009 and newer
Filter Input 21815 Mr Heater Heatstar DewaltFilter Input M12179Filter Kit F221887 Mr Heater and Heatstar and Dewalt

$4.00

$2.00

$12.00

This F263016 filter kit was used on Mr Heater and Dewalt heaters made from 2004-2008. Original OEM Portable Heater Parts The 21814 output filter is used on Mr Heater, Enerco, Dewalt, Heatstar The 23270 output filter was used in a few Mr Heater, Heatstar and Enerco heaters
Filter Kit F263016 Mr Heater and Heatstar and Dewalt PP214Filter Output 21814 Mr Heater Enerco Dewalt HeatstarFilter Output 23270 Mr Heater Heatstar

$10.00

$3.00

$5.00

This fuel cap is used on all oil fired heaters made by Pinnacle. Brands include Pro Temp, HeatHog, Dayton, WorkHorse, Dyna-Heat, Dyna-Glo, and Dyna-Pro. This 70-006-0125 plastic fuel cap was used on Pinnacle heaters made after 2013 The 21813 is the gasket only for Mr Heater, Enerco, Dewalt, and Heatstar heaters
Fuel cap 28732 or 2151-0003-00 or 2151-0041-00 or 70-006-0120Fuel Cap 70-006-0125 Pinnacle 35-215K btu 26959 70-006-0100Gasket 21813 for Mr Heater Enerco Dewalt Heatstar

$10.00

$10.00

$3.00

Hose Barb 28783 MH125-210KT Mr heater This 22221 ignition module was used on Mr Heater and Heatstar 2006 models Ignition Module 22222 Hr Heater Buddy Pro Air series
Hose Barb 28783 MH125-210KT Mr heaterIgnition Module 22221 Mr Heater NLA no replacementIgnition Module 22222 Hr Heater Buddy No Longer Available

$5.00

$56.00

$71.00

This 22142 ignitor assy was used on nearly all Mr Heater and Heatstar oil fired heaters The 2235 ignitor was used on the K125 and K175 heaters made by Scheu The 26834 insert was only used on heaters made by Mr Heater Brands include - Buddy, Dewalt, Heatstar and Mr Heater Some models include - 50K, 75KT, 125KT, 175KT, 210KT
Ignitor 22142 Mr Heater and Heatstar and Dewalt HeatersIgnitor 22235 All Pro, also 2235 NO LONGER AVAILABLEInsert 26834 Mr Heater only

$66.00

$6.00

$3.00

You can use these insulated wires to jumper terminals when testing to see if your photocell is bad. Many other purposes. Sold by the pair. This black 28651 knob slides on a ball valve on 80CV & 200CV heaters
Jumper Wires Insulated 18" T100-02 or T100-82Knob 23511 Control Valve MH125LP HS 125LP Mr Htr or HeatstarKnob 28651 Mr Heater 80CV 200CV also part# 8651 NLA

$8.00

$5.00

$5.00

The 28773 burn rate adjustment knob was used primarily on 170K btu LP heaters This 113889-01 limit switch was used on 55k & 85k btu LP heaters sold by Desa and Mr Heater.
Knob 28773 Burn Rate knob used on 170K btu LP htrs also 8773Limit Switch 113889-01 55-85k btu LP htr 1751 or 21751 or F22879Limit Switch 21796 All Pro 75K btu

$11.00

$10.00

$10.00

The 21797 was used on a 2003 125K btu heater, possibly more The 21798 limit switch was used on the 175k btu series in 2003 Limit Switch 22105 Mr Heater 210KT 2006 and newer
Limit Switch 21797 Mr Htr Heatstar Dewalt 1797Limit Switch 21798 Mr Heater 175K 2003 model 1798Limit Switch 22105 Mr Heater 175- 210KT also 26902

$8.00

$8.00

$6.00

This 1/4 hp - 3450 rpm - 4 amp - 4 wire motor is used on 125-210k btu Mr Heater and Enerco heaters. 170K BTU motor for LP Gas heaters.
Limit Switch 26901 Mr Htr 125K 2006 and newerMotor 1/4 hp 28738 125-210k btu htrs 26975 or 6841 or 21818Motor 121208-01 LP Htr 170K btu Reddy Master also 22251

$10.00

$151.00

$80.00

The 1652 motor was used on 40-55k btu LP heaters The 21818 motor was used on Mr Heater MH125KTR, MH175KTR and MH210KTR oil fired heaters This 22109 nozzle was used on 210K Btu heaters. Brand names include: Mr Heater, Heat Star and Enerco
Motor 1652 All Pro & Universal 40-55K btu LP htrs 21652Motor 21818 Mr Heater MH125-210KTR now 26975Nozzle 28714 Mr Heater Heatstar 185-210K Btu 22109 F221891

$51.00

$141.00

$36.00

The 22203 nozzle is for older 125K btu oil fired heaters made by Mr Heaters The 28712 nozzle was used in 135K btu oil fired heaters made by Mr Heater. Nozzle 28713 Mr Heater Heatstar 175K btu
Nozzle 22203 HeatStar, Mr Heater older 125k btu modelsNozzle 28712 Mr Htr 135K btu Dewalt HeatstarNozzle 28713 Mr Heater Heatstar 175K btu 8713 28743 8710

$24.00

$26.00

$28.00

This 28741 nozzle was used on 75K Btu heaters. Brand names include: Mr Heater, Heat Star and Enerco This 28742 nozzle was used on 125K Btu heaters. Brand names include: Mr Heater, Heat Star and Enerco Nozzle 27416 Mr Heater Heatstar 7416 50k btu heater
Nozzle 28741 Mr Heater Heatstar 75K Btu 28711 F221878Nozzle 28742 125K Btu also # F221879Nozzle 7416 or 2741 or F227416 nozzle MR Heater 50K BTU

$30.00

$31.00

$31.00

The two hose barbs are the same size, approx 1/4" in diameter This was used on heaters made by Scheu and Mr Heater Nozzle Holder 28739 MH125-175KT Mr Heater The 28785 is an on off switch for Mr Heater, Heatstar and Dewalt haeters
Nozzle Holder 27790 50-150K btu Mr Heater All Pro 7790 7417 Nozzle Holder 28739 MH125-175KT Mr HeaterOn/Off Switch 28785 Mr Heater Heatstar Dewalt All Pro 8785

$5.00

$5.00

$6.00

The F226865 photocell was used on heaters made by Mr Heater The 21872 on/off switch was used on Mr Heater, Heatstar and Dewalt heaters 2009 and newer The 40831 power switch was used on Dewalt 50-190K btu heaters.
Photocell F226865 Mr Heater Heatstar Dewalt 6865 also 26903Power Switch 21872 Mr Heater or Heatstar 2009 and newerPower Switch 40831 Dewalt 50-190K btu htrs

$13.00

$3.00

$5.00

The 147010 adjusting screw was used on oil fired heaters made by Toro, Scheu and Mr Heater Brands Include - Toro, Champion, Porta Heat, Lawn Boy, Gilson, Red Line, Universal, All Pro, Mr Heater and many more! This kit includes the ball, spring, plastic plug and plastic adjusting screw. This is the same as part number PP217. These are packaged in a ziploc bag, NOT blister packed. Regulator 11666 Mr Heater and Enerco
Pump Adjusting Screw 147010 Toro, Universal, Champion 6842Pump adjustment kit PP217 or HA3020 or F266842Regulator 11666 Mr Heater and Enerco

$2.00

$3.00

$29.00

As far as we can determine, this17314 regulator was used on nearly all Tank Top heaters!!!! This regulator was used on tank top heaters made by Desa. Brands include Reddy, Master and Heat Demon Reset button 26886 for older Mr Heater and Heatstar heaters
Regulator 17314 Tank Top htr - Mr Heater Buddy Sunrite 217314Regulator LPA2025 tank top also F273606 and E73410 or 7919Reset Button 26886 Mr Heater or Heatstar NLA

$16.00

$22.00

$8.00

This steel body ring is 5/8" thick. This was used in most heaters however, 1/2" and 3/4" steel body rings have also been used. Make sure you measure the thickness of your ring. Is the same as 147003. The screws are included. This 21810 Filter Plate works on Mr Heater Enerco Heatstar heaters This filter plate works on phpdistribution heaters This M50545 metal plate covers the motor. It is used on all heaters 100k btu and larger made by Desa. Brands include Reddy, Remington, Master, Koehring, Knipco and more.
Rotor body ring 5/8" 079975-03 or 6833 or 26833 or 3541-0050-00Rotor Cover Plate 21810 Mr Heater Enerco Heatstar Dewalt HeaRotor Cover Plate M50545 Master Reddy Remington Mr Htr 22106

$13.00

$14.00

$32.00

This F226831 rotor kit is used on Mr Heater or Heatstar oil fired heaters Screw used on heaters made by Desa. Primarily used to fasten the top shell to the bottom shell. Brands include Reddy, Remington, Master, Knipco, Koehring and more. This solenoid valve will work on every 350k and 600k btu heater made by Desa.
Rotor Kit F226831 All Pro 5/8" x 2" dia Mr Heater Heatstar 6831Screw 10-24 x 1/2" M15823-27Solenoid valve M50077 or LB White 120-20840

$31.00

$0.50

$60.00

This spark plug was used on all oil fired heaters 70K btu and below made by Desa (that used spark plugs). Brands include Reddy, Master, Remington, and more. The T100-50 8 ft test cord has clips that allow you to test motors and transformers and anything you may have. This #8301 13" Thermocouple was used on some Universal and All Pro patio heaters. Models include 45PHS, 44PHW and more
Spark Plug PP212 or HA3013 or M29835 or 147640 or 1083Test Cord T100-50Thermocouple 8301 Patio Heater 13"

$3.00

$16.00

$29.00

This 114121-01 thermocouple is 18" in length. It was used primarily on 35K btu LP heaters. The 21734 Thermostat assy is for Mr Heater or Heatstar heaters from 75-210K btu Thermostat 22254 for Mr Heater and Desa htrs 113944-01 2254
Thermocouple 18" 114121-01 or 09352Thermostat 21734 Universal, Mr Heater, All Pro, Heatstar 1734Thermostat 22254 for Mr Heater and Desa htrs 113944-01 2254

$31.00

$16.00

$20.00

This thermostat knob was used on Heatstar heaters 75k to 210k btu 2009 and newer This knob is used on part# 22264 This is the tip over switch used on tank top heaters made by GHP. Brands include Dyna Glo and Thermoheat
Thermostat Knob 21823 Heatstar 75k-210kThermostat Knob 28772 Mr Heater 8772Tip Over Switch TT15C-08 Tank Tops and RA18LPDGD also FD4

$4.00

$4.00

$10.00

The 104119-01 gas valve was used primarily on 100K & 125k btu The 27285 gas valve was used in 55-125K btu LP gas heaters made by Mr Heater Models include - MH55FAV, MH85FAV, MH125FAV, HS55FAV, HS85FAV, HS125FAV, TS55FAV, TS125FAV The 28081 valve was used in 35K btu LP gas heaters made by Mr Heater
Valve 104119-01 Radiant 125K btu LP Universal Master 6103Valve 27285 Mr Heater 55FAV 85FAV 125FAV Heatstar Buddy ProValve 28081 Mr Heater 35K btu LP Heatstar Buddy Pro

$100.00

$40.00

$21.00

Wheel Frame Support 21875 Mr Heater

$31.00