Filter Element DS-T-06 Daystar by Val6, MPX, Z-1

The filters shown are the two filters for the VAL 6 heaters.

The smaller (tan) filter is the DS-T-06 filter for the DAYSTAR models

There are two filter sizes.  The smaller one is used for the Daystar the an older MPX,  "Z-1" model. 


All other models use the larger one. 

Filters should be replaced at least every 300 hours of operation and one a year and is a simple 4 minute job to replace.  If dirty fuel is mistakenly used, the filter should also be changed. 

On the Daystar model the filter is located in the tank attached to the bottom of the suction intake tube. 

Unscrew the upper connection and lift the rubber gromet with the tubing to gain access being careful not to lose the filter into the tank.  All other models have an external housing and can be removed with a hand turn of the mounting screw top. 

Restarting will require priming and may take two or three on/off cycles to accomplish. 

Alternate Part #: DST06

Please visit our Home Page to learn about Shipping Information and Discounts.

The filters shown are the two filters for the VAL 6 heaters. The smaller filter is the DS-T-06 filter for the DAYSTAR models
Click To Enlarge
  * Marked fields are required.
Qty*
Price $16.00
Availability In-Stock
Reviews (0) Write a Review
No Reviews. Write a Review