Shop Toro, Lawn Boy, Porta Heat and Champion heater parts

These parts will work in heater brands Toro, Champion, Lawn Boy and many others.

This air gauge can be used to test ALL low pressure portable oil fired heaters 0-15 PSI. Air Gauge 0-160 psi  G14494 This Tubing has a 1/4" opening. This is a 25ft pc. This is the same as any hose that begins with M50814. You can cut to size.
Air Gauge 0-15 psi HA1180 G14490Air Gauge 0-160 psi G14494Tubing M50814-07 1/4” x 25 ft

$14.00

$16.00

$24.00

This axle is 19" in length and 1/2" in diameter. It can be used on many heaters. These are the screws used for all body rings. They are sold by the pair Cad Cell 222048 Air Scoop Htrs Toro Champion Photo Cell
Axle 19" M51015-01Body ring screws FHPF3-5CCad Cell 222048 Air Scoop Htrs Toro Champion Photo Cell

$5.00

$0.40

$26.00

four wire circuit board replaces older 3 wire boards Brands include: Toro, Lawn Boy, Porta Heat, Century, Arctic Flame and more Electrode 154185 320-650K btu Champion Porta Heat
Circuit Board 154361 4 Wire Toro Porta Heat Lawn BoyElectrode 154185 320-650K btu Champion Porta HeatFan 154116 Air Scoop heater by Toro

$24.00

$10.00

$25.00

This 8" 5 blade fan was used on 100k btu heaters. Brands include Toro, Lawn Boy, Champion and more. This 9" 5 blade fan was used on 150k - 160k btu heaters. Brands include Toro, Lawn Boy, Champion and more. This filter cover was used on nearly all oil fired heaters made by Toro/Lawn Boy and Century. Brands include, Toro, Porta Heat, Lawn Boy, Champion, Red Line, Arctic Heat and more.
Fan blade 154032 8" 5 blade 100k btuFan blade 154043 9" 5 blade 150k btuFilter Cover 148115

$16.00

$16.00

$15.00

This filter was used on oil fired heaters made by Toro/Lawn Boy and Century after about 1990. Brands include, Toro, Porta Heat, Lawn Boy, Champion, Red Line, Arctic Heat and more. This is the output filter used on Toro, Champion, Lawn Boy and Porta Heat oil fired heaters Filter Output 154467 older Champion oil fired heaters
Filter Input 147019 Toro, Champion, Lawn Boy, Porta Heat 6844Filter output 154003 Champion Porta Heat Gilson Lawn Boy 6843Filter Output 154467 older Champion oil fired heaters

$2.00

$4.00

$4.00

This filter plate was used on oil fired heaters made by Toro/Lawn Boy and Century after about 1990. Brands include, Toro, Porta Heat, Lawn Boy, Champion, Red Line, Arctic Heat and more. This fuel cap is 2 1/8" diameter. Used on Desa heaters. Brands include Reddy, Master, Remington and more. This is the small fuel filter used in all low pressure Desa oil fired heaters EXCEPT the 200k btu units. This filter may be clear or white. Brands include Master, Reddy, Remington and more.
Filter plate 148234Fuel Cap 2 1/8" 097702-01Fuel Filter M51150-01 or 106896-01 or 1408 (in HA3017 kit)

$15.00

$1.40

$4.00

This extra large, high capacity see through fuel filter is twice as big as the original.Works better with dirty diesel than original. Due to size, it should only be used with 100K btu and larger oil fired heaters. This is the rectangular shaped gasket used on heaters made by Toro. Brands may include Champion, Lawn Boy, Porta Heat, Toro and more
Fuel filter 147046 threaded Toro Champion Lawn Boy Gilson Fuel filter M51150-XL High CapacityGasket 147012

$0.00

$2.50

$3.00

You can use these insulated wires to jumper terminals when testing to see if your photocell is bad. Many other purposes. Sold by the pair. This fan switch was used on "Air Scoop" type heaters. Brands included Toro, Lawn Boy, Champion, Porta Heat, Century and more. The btu sizes for these heaters were 120K, 155K and 230K BTU This limit switch was used on "Air Scoop" type heaters. Brands included Toro, Lawn Boy, Champion, Porta Heat, Century and more.
Jumper Wires Insulated 18" T100-02Limit Fan Switch 154103Limit Switch 154102

$6.00

$20.00

$20.00

This 1/4 hp - 3450 rpm - 4 amp - 4 wire motor is used on 125-210k btu Mr Heater and Enerco heaters. This 6" long multi tool has 14 different blade uses. It includes a nylon pouch with belt loop.
Motor 1/4 hp 28738 125-210k btu htrsMotor 154108 air scoop 155k btuMulti Tool 243-2883

$121.50

$135.00

$3.00

.85 x 80B nozzle used in oil fired heaters and steam cleaners. 1.00 x 80B nozzle used in oil fired heaters and steam cleaners. 1.10 x 80B nozzle used in oil fired heaters and steam cleaners.
Nozzle .85 x 80B #8580BNozzle 1.00 x 80B #10080BNozzle 1.10 x 80B #11080B

$7.00

$7.00

$7.00

2.00 x 60B nozzle used in oil fired heaters and steam cleaners. This nozzle is used on 50-55k btu heaters made by Toro. Brands include Lawn Boy, Champion and more. This nozzle was used on most 97-100k oil fired heaters made by Toro, Lawn Boy and Century. Brands include Toro, Lawn Boy, Champion, Gilson, Ford and more.
Nozzle 147377 2.00 x 60B #20060B Nozzle 154028 50-55K BTU also # 154881 29719-024Nozzle 154030 97-100K btu Toro, Lawn Boy, Champion, Porta Heat

$7.00

$30.00

$30.00

This nozzle was used on most 150k oil fired heaters made by Toro, Lawn Boy and Century. Brands include Toro, Lawn Boy, Champion, Gilson, Ford and more. Nozzle 154388 for 230k btu Air Scoop Heaters by Toro Gilson This is the only plastic nozzle holder used on heaters made by Toro, Lawn Boy and Century. Brands include Toro, Lawn Boy, Champion, Gilson, Ford and more.
Nozzle 154060 150k btu Toro Lawn Boy Champion 232749Nozzle 154388 for 230k btu Air Scoop Heaters by Toro GilsonNozzle holder 147081 old# 222586

$25.00

$10.00

$1.75

This O Ring can be used on any nozzle in a space heater, that uses an o ring. This o ring is used between the metal plate and plastic filter housing on heaters made by Toro. Brands include: Champion, Toro, Porta Heat and a few more This photocell was used on Desa oil fired heaters that used a spark plug. Brands include Reddy, Remington, Master, Knipco,and more. 22" Wire length. It is the same as part number PP216, M16656-4, M16656-21 and M16656-17 Original. NOT MADE IN CHINA
Nozzle O Ring #31351 old Toro# 223466 and 147082O Ring 73-6440 Photocell PP216 or HA3019 photocell M16656-4 -17 104679-01

$1.20

$1.00

$8.00

This brass tailpiece connects an LP regulator to a propane tank. This type of connector can be used with ALL LP gas heaters. Also part# 6252 and 113791-01 This o ring is used on brass tank connectors, sometimes referred to as POL fittings This power cord was used on DESA oil fired heaters that used a spark plug. It may have been used on others also. Brands include Reddy, Remington, Master, Knipco, Koehring and more.
POL LP fitting G1629 POL O-Ring G1653-3Power Cord 6" 098219-38

$5.60

$1.00

$3.00

This pump was used on Champion Air Scoop heaters and also the larger 320k btu & 650k btu heaters. Pump 154276 works on Air Scoop heaters A2VA-7116 This is the small plastic air pump adjusting screw used on all filter covers on heaters made by Desa. Current color is yellow. It was normally black. There is a hole in the middle of the screw.
Pump 154180 air scoop & 320-650k btu Champion Htrs A1YA-7912Pump 154276 works on some Air Scoop heaters A2VA-7116Pump adjusting screw M27694

$100.00

$100.00

$1.50

This kit includes the ball, spring, plastic plug and plastic adjusting screw. This is the same as part number PP217. These are packaged in a ziploc bag, NOT blister packed. Steel ball used in air pump systems for every low pressure oil fired heater made by Desa. Brands include Reddy, Master, Remington, Knipco, Desa, Koehring and more. This is the pump diaphragm for Suntec or Sundstrand 7000 series pumps. Exmple of model would be A1VD-7912
Pump adjustment kit PP217 or HA3020 or F226842Pump Ball M8940Pump Diaphragm 3773151

$3.00

$1.00

$10.00

This is the pump spring used on ALL low pressure oil fired heaters made by Desa. Brands include Master, Reddy, Remington, Desa and more. This is the filter strainer and gasket for the older 7000 series Suntec pumps. This gasket is square. The model # is stamped on the top of the pump. Example A1YA-7912 This high pressure regulator is set at 10psi. It was used primarily on LP convection heaters. It is the same as Desa part# 113819-01 and also goes by 130-00. The tank connector comes pre-attached.
Pump spring M10993-1Pump Strainer and gasket S160-10Regulator 10psi 6256POL

$1.00

$5.00

$14.00

This low pressure regulator has an output of 11". It has a tank connector already attached. This regulator is used primarily on 150K btu LP gas heaters. Same as Desa part # LPA2100 and 230-00 The 1/2" rotor was used on 60K, 75K and 94-97k btu oil fired heaters made by Toro/Lawn Boy and Century. Brands include, Toro, Porta Heat, Lawn Boy, Champion, Red Line, Arctic Heat and more. The insert is included. The 5/8" rotor was used on 40k, 55k, 100 to 220k btu oil fired heaters made by Toro/Lawn Boy and Century. Brands include, Toro, Porta Heat, Lawn Boy, Champion, Red Line, Arctic Heat and more. The insert is included.
Regulator 11"w.c. 6255 LPA2100Rotor 1/2" 147757 includes 4 bladesToro Lawn Boy Champion GilsonRotor 5/8" w/ insert 73-6420 Champion Porta Heat Lawn Boy 113103

$12.00

$36.00

$34.00

Rotor Blades  1/2" M8643 154598 These are the blades used in the rotor slots. These blades work with the 5/8" thick rotor. They are sold by the package of 4. The Desa part number is M8643-2. The Champion/Toro number is 154616. The screws are included.
Rotor Blades 1/2" M8643 154598Rotor Blades 5/8" M8643-2 or 154616 or 604343Rotor body ring 1/2" 079975-02

$8.40

$9.60

$18.00

This steel body ring is 5/8" thick. This was used in most heaters however, 1/2" and 3/4" steel body rings have also been used. Make sure you measure the thickness of your ring. Is the same as 147003. The screws are included. This black insert was used on all oil fired heaters made by Toro/Lawn Boy and Century. Brands include, Toro, Porta Heat, Lawn Boy, Champion, Red Line, Arctic Heat and more. This 7 terminal safety control was used on heaters made by Toro. Brands included: Champion, Porta Heat, Lawn Boy and more
Rotor body ring 5/8" 079975-03 or 6833 or 26833Rotor Insert 73-6430Safety Control 7 Terminal 6863 also part# 26863

$18.00

$1.20

$36.00

Screw used on heaters made by Desa. Primarily used to fasten the top shell to the bottom shell. Brands include Reddy, Remington, Master, Knipco, Koehring and more. This 4" Ratcheting Screwdriver Set includes 30 pcs and a nice plastic hinged carry case. This solenoid valve will work on every 350k and 600k btu heater made by Desa.
Screw 10-24 x 1/2" M15823-27Screwdriver Set 243-8123 30 pc RatchetingSolenoid valve M50077

$0.50

$3.00

$60.00

This spark plug was used in 100 & 150K btu oil fired heaters made by Lawn Boy, Toro and Champion. Brands include Champion, Century, Lawn Boy, Red Line, Porta Heat. I-3 is stamped on it. This spark plug was used on all oil fired heaters 70K btu and below made by Desa (that used spark plugs). Brands include Reddy, Master, Remington, and more. Plastic strain relief used on heaters made by Desa. Brands include Reddy, Remington, Master and more
Spark Plug 147080 I-3 55-150K BTU 220421Spark Plug PP212 or HA3013 or M29835Strain relief M11143-1

$18.00

$4.40

$0.60

This brass t block allows you to connect multiple LP tanks together. It is used with hose # 1630RU or 1662 pigtails. This can be used with LP tanks 250lb and smaller. This 8 ft cord has clips that allow you to test motors and transformers and anything you may have. If you have a multi meter, you can test your thermocouple to see if it is defective.
T block manifold P400Test Cord T100-50Thermocouple test

$15.00

$16.00

$10.00

This transformer was used on oil fired heaters. Brands include Toro, Lawn Boy, Champion, Redline, Green Line, Guardian, Arctic Flame and more. Transformer 154770 320K & 650K Champion - Porta Heat
Thermostat PP234 remote also part# HA1210Transformer 154009 Toro, Champion, Lawn BoyTransformer 154770 320K & 650K Champion - Porta Heat

$50.00

$0.00

$175.00

This 8" wheel was used on nearly all low pressure oil fired heaters made by Desa. Brands include Reddy, Master, Remington, and more. Normally the wheel was white or black. As you can see, these are yellow.
UPS Blue additional $35 fee for orders under $50Wheel 8" 097896-01 also 107426-01

$35.00

$6.00

These parts will work in heater brands Toro, Champion, Lawn Boy and many others.